John,

Hopefully your project is moving along nicely!

Part numbers:
3653618 Gasket , pinion Bearing reteainer to Carrier
3652257 Seal assy, pinion Flange Oil

Also attached is a page from the part manual that you might find useful.

Alex

Thanks Alex
 

This is very helpfull.
And yes my truck is ready for the road just some issues after test driving.
Will post picture later but have to reduce size before uploading.

As promised
 

My almost fully restored 1940 CMP C15, cab 11

After replacing the engine I did some test driving and completed in total 150 mile without any serious trouble so very proud and ready for the season!!

Looking for part numbers
 

My speedometer was not working, and replaying the cable did not work.
When I opened the gearbox the speedo drive was missing.

Now I am looking for a few part numbers:
I believe in my truck sits a sm420 4 speed gearbox.

I am looking for the speedo drive gear. Indicated as 4.337 speedometer gear on the picture. Are they available anywhere?
And I would like to renew the (Rear) oil seal on the gearbox.

Appreciate all help.

John,

I saw your truck in Wageningen; nice work!

Speedo drive gear for the C15 is GM 603074; it's not shared with other CMP's in the range.

Have you asked Stefan at LWD for the seal? There has been some talk about these seals on the forum lately as well....they do come up for sale on Ebay, and I think they are also available from the US Chev parts suppliers.

Alex