Would be a labour of love for a toolmaker to build a proper set of stamping dies then have the press with the tonnage to stamp them!
|
The clam shells can be done with truck steel wheels cut in half and trimmed with a plasma cutter . It’s hard to tell the difference and it’s cheap . Try it .
|
CMP tool boxs
4 Attachment(s)
George McKenzie I believe posted drawings in MLU and also Bob Hammond, I do have drawings and will see if I can locate for both box and tire clamps, there are different tool box's depending on cargo box model
Attachment 116370 Attachment 116373 Attachment 116374 Attachment 116375 |
tool box
5 Attachment(s)
believe these where George McKenzies rough drawings, Bob I believe used a cut down or 1/2 of a the small propane tank to fabricate the clam tire clamps
Attachment 116376 Attachment 116377 Attachment 116378 Attachment 116379 Attachment 116380 |
CMP tool box and spare tire holder plans
Quote:
|
How to attach the early tool box to the chassis frame:
http://www.mapleleafup.net/forums/sh...788#post281788 |
How does the Cab 13 tool box fit to the chassis?
http://www.mapleleafup.net/forums/sh...ad.php?t=23955 |
Quote:
By Mike Timoshik: http://www.mapleleafup.net/forums/sh...4810#post94810 And JoćoBoscoBarbosa: http://www.mapleleafup.net/forums/sh...ad.php?t=25612 |
All times are GMT +2. The time now is 21:55. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016