Under all that snow is a CMP :whinge when i will start working on my truck when :whinge

http://img87.imageshack.us/img87/9451/1003621.jpg
http://img87.imageshack.us/img87/1003621.jpg/1/w600.png

snow
 

I am not going to complain about snow again....you have enough of it to go around...!!!!

Mike

Eric, when you asked "is it normal to have this part on a F15A" that's the stopper for the overload springs. I don't think the 15 cwts came out with overloads and they are post-military additions for when farmers wanted to haul grain, etc. I just looked at 8 of my 15 cwts and 5 of them have had the overloads installed. No two have the same stopper setup. A few have stoppers off civilian 2 or 3 tons but most have a home made fabrication. (or should I say fornication?)

Hi,
Here a pic of my truc is that the bump on hood and thos helper on it is for a F22 :confused and i have a big power stering
http://img15.imageshack.us/img15/458...e200420048.jpg
http://img15.imageshack.us/img15/18s...jpg/1/w900.png

New picture please.....
 

Eric

Can we have another picture after the current 50 cm ( 18 inches) snow storm...... I think it will be July before that melts.....

BooBee

:bang: :whinge :whinge :whinge :whinge :whinge :whinge :whinge :bang:

Hi,
Any one know the specification for F22 :giveup and for my hood is it normal if is not a f22 to have a hood like this :confused

Seat pictures.....
 

Eric

Here are some pictures of the seat strap......

One inch wide ... bent back one inch at either end..... 1/8 thick.....

Radius of the bend is approx. 10 inches......overall lenght of the strap is 16 inches plus one inch bent back at either end....

Bob

Thanks Bob,
And here what is the springs dimension and how long is it :confused and what is the size of the ring :giveup
http://img23.imageshack.us/img23/453...g20montage.jpg
http://img23.imageshack.us/img23/spr...jpg/1/w700.png

Back to the barn....
 

The rings are one inch.....some were flat washers with four small holes drilled for the spring.....

Will need to measure/photo an old seat for you this weekend....

Boob

Hi
Can't wait have to call the big artillery :drunk:
http://img13.imageshack.us/img13/198/1003650.jpg

Hi Eric

Well glad to se you can at least find the Blitz :thup2:

We had another 2" of snow today, silly stuff wish we could send it all to Texas as I heard they need the water, good riddens ! :salute:

If you like me you cant wait to get puttering on your truck
seems like it takes us Canadians twice as long to get something done as we have only have half the year in which to do it :yappy: unless you have the MEGA heater real Canadian garage for the winter.

LOL

Keep us in the loop Eric ..........

Hi,
Don't worry nex winter is in my garage i have the space :D

Spring is coming
 

look who is taking a sunbath :yappy:
http://img408.imageshack.us/img408/8167/1003651.jpg
:sheep:Spring is coming :drunk:

Eric

Hey that looks better .... :D, we had in the last 2 days about 5 " of snow, and today its sunny and melting again, but like you spring is coming .......... just real slow this year !

Hi,
little up date working on the willys the cmp still in the snow :mad:
http://img252.imageshack.us/img252/4300/1003661.jpg
Now i have to remove the rust
http://img17.imageshack.us/img17/7290/1003676c.jpg
http://img4.imageshack.us/img4/15/1003686.jpg
http://img4.imageshack.us/img4/783/1003687.jpg
http://img244.imageshack.us/img244/6243/1003714.jpg
http://img244.imageshack.us/img244/5487/1003715.jpg
http://img244.imageshack.us/img244/3448/1003716.jpg

it a live!!!!!!!!!!!!!!!!!
 

Hi,
It a live :drunk: http://www.youtube.com/watch?v=FDWLdmHpe7c

Interesting
 

I had not noticed from the earlier pictures the door modifications has the drivers side door and opening been extensively modified?

As to engine running as there was not a cloud of blue, white, or black smoke and the noises are of a tolerable nature, (no big bangs taps etc.) it looks like the patient will live.

Cheers Phil

Hi,
You right for the door but i have a order door for it and for the engine i was surprise to no smoke my father and neighbor was surprise for the year of the truc :sheep:
What could i sais it a Ford :teach:

Hi,
Here a up date of my willys m38a1 1953 i change the hold floor :blink:
http://img56.imageshack.us/img56/151/1003746.jpg
But still working on my CMP :sheep:

Hi,
Nice day to work on the Ford here is some up date :sheep:
working on the box
http://img510.imageshack.us/img510/286/1003750.jpg
http://img510.imageshack.us/img510/9096/1003751.jpg
And here a home made winch :ergh: pic before i remove the massacre :doh:
http://img510.imageshack.us/img510/112/1003752.jpg

Hi,
Before :ergh:
http://img510.imageshack.us/img510/286/1003750.jpg
After :D
http://img8.imageshack.us/img8/1908/1003757.jpg

Looks good Eric .............. keep up the good work

Hi
I found this on the back of the box of the Ford any infot???
http://img23.imageshack.us/img23/3824/1003764q.jpg

Eric,

In haste I cannot read all the details on your plate, but it should be similar to the plate on the body of my F15A.
In my case the manufacturer is "Canadian Top & Body Corp. Ltd. Tilbury Ont. Canada".
The body serial number is 42 03 2C1 7025, denoting year, month, body type, serial number.

- Hanno

Eric's body data plate seems to read:

(missing word, maybe "BODY") MANUFACTURED BY
W.D. BEATH & SON LIMITED
TORONTO, CANADA
SERIAL No. 42 1 2C1 298

The body does look like a 2C1 body, all steel, welded construction.

Hi
your right :thup:

Hi,
Is 42 the year that they made the box :confused

Using Hanno's decoding information it was made in January 1942. This is a believable date for a 2C1 body. The 2C1 body was one of the earlier bodies for the 15 cwt trucks. I don't have a date for the change in body types but in general the the 2B1 was used on cab 11 and 12 trucks (there are photos of it on the 13 cab as well) the bodies 2C1 2H1, 2J1 were mainly on cab 13 but there are photos of the 2C1 on cab 12 chassis.

I think there was a 2A1 as a prototype or very early production body. I don't know if there were ever 2D1 or any of the other missing body codes. Has anyone ever seen a listing of the body codes? There's some information in the AEDB Design record but it isn't a full listing (or even close).

Yes, Bill Gregg listed the body types in his "Canadian Military Vehicle Profile Series" Vol. 2. Colin Stevens has scanned them and put them on his CMP web page.

- Hanno