MLU FORUM - UC MK.II* Canadian armor thread

Page 2 of 2

Show 30 post(s) from this thread on one page

MLU FORUM (http://www.mapleleafup.net/forums/index.php)

- The Carrier Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=6)

- - UC MK.II* Canadian armor thread (http://www.mapleleafup.net/forums/showthread.php?t=23069)

Radek

13-01-15 12:16

Bolts on the front sloping armor

Could somebody tell me which kind of the bolts and nuts (BSF, UNF 5/16, 1/2, ...) are on the front sloping armor? thanks

Lynn Eades

13-01-15 18:38

Hi Radek, they are 3/8" BSF.

peter simundson

13-01-15 21:01

Bolts (machine screws ?)

Brian Asbury has a lot of these 3/8" BSF flat head slotted screws.

Makes it easy to cut them off when they won't move

PS

Radek

14-01-15 17:08

Bolts

Guys thanks for info. Now are any on ebay. Thanks

Radek

11-02-15 12:11

Gunners plate

1 Attachment(s)

Still working on the gunners plate.
Friend has noticed, that I have made mistake on the drawings.
Could somebody help me with red dimensions?

Lynn Eades

11-02-15 20:07

Radek, you are on the right track. Do you have the mantlet? (the bit that folds up)
If you have it, I would carefully position the pivot screw hole on the other side of the gun slot, first. Then you can plot the path of the slot.

Radek

11-02-15 20:39

gunners plate

Hi Lynn,

I have only lover half of the plates, without mantlet. :-( I need help of MLU members with this. :cheers:

Radek

21-02-15 22:33

UC in car :-D

1 Attachment(s)

I have pick up (lend) front armor from friend. I know it is MkI, but I haven´t better. :-(
Look how to put UC in to the Piccaso :-D

All times are GMT +2. The time now is 13:06.

Page 2 of 2

Show 30 post(s) from this thread on one page