Hi,
Wow thanks for the pic :thup2: with this information that mean my truck is a 1945 truck it have the snorkel dog house and the opening on the roof :teach:
I send you a pm for mor information :D

HI,
Anyone else have a dog house like this one?
http://img97.imageshack.us/img97/6226/1004585.jpg

Hi,
I wonder if anyone could help me find this part :giveup
http://img22.imageshack.us/img22/4114/img7196.jpg
thx

Hi,
Thank to Van Hove Herman whit is pic for the water kit he juste answer some question that no one could answers beford :drunk:

This braket is on the back of the roof this is for the breather
http://img5.imageshack.us/img5/816/1003590sy7.jpg
http://img5.imageshack.us/img5/10035...jpg/1/w600.png
http://img189.imageshack.us/img189/4470/redxr.jpg

Hi,
Here some order part of the waterproof kit install on my CMP :teach:
http://img138.imageshack.us/img138/2372/1004607.jpg
This air breather is being the driver's seat is it original :confused
http://img138.imageshack.us/img138/6641/1004601.jpg

Hi,
What brand of gauge Ford use in 1945 :confused

Hi,
I need a pic of a cab ford cab13 the driver side from the floor up to the steering colonne i have a cut there and not sure if it original or not :coffee
please help :giveup :giveup
http://img534.imageshack.us/img534/679/1004726h.jpg

Uploaded with ImageShack.us

The Handle in front of the Crew Commander/Navigator seat is what I like to refer to the "Holy Sh*t Handle," cause there isn't much else to hang on to while going cross country. Wouldn't think these are hard to find since they are heavy gauge steal but should be easy to re-produce as well

Conduit hole
 

Here's a shot from the inside Eric.
The cut is to allow the nose clip to be removed without disconnecting all the wires. You have a lot more holes in that side plate.
Regards Terry

Hi Terry,
Thanks for the infot :thup:

Hi,
Working on the ford fixing all the front that had a hard life and maybe suffer of the underwater kit install on it :)
http://img88.imageshack.us/img88/2622/1004728.jpg
http://img228.imageshack.us/img228/7122/1004731.jpg
http://img35.imageshack.us/img35/1729/1004735x.jpg

Hi,
More up date :D
http://img29.imageshack.us/img29/9231/1004741d.jpg
http://img697.imageshack.us/img697/9315/1004744.jpg

Hi,
I am looking for this braket so if anyone could help me find it :giveup
http://img72.imageshack.us/img72/6435/remov.jpg

Hi,
I found this on the ford fire wall do you know if this is original it ave the canadian leaf and some army green ;) and i found it small compaire to the willys one :blink:
http://img227.imageshack.us/img227/3870/1004751.jpg

Hi,
Know one could tel if this is original for cmp???
thx
Eric

Maybe......
 

Hi Eric

On the voltage regulator I doubt that the original would have lasted 65 years... hard to tell.... all the ones I have seen on old trucks do not have the red tag on them.

In any event you probably would not want to trust it anyways. The best source for a replacement...plain black almost same size as the orignal... is a farm tractor shop and they will have repro in 12volts and 6 volts....... with the saem connections.

On your removable nose bracket...... best bet is to find a suitable size angle iron and fabricate your own....... the original was made from a 1/8 thick flat steel bent in a large press..... a local steel shop can bend it for you.... all depends how original you want to be.

Good luck

Boob

Hi Boob,
For the regulator i juste want to keep it if this is the original one i will go with 12v systeme !
And for the braket i think i will do a reproi can't seem to find a paire :whinge
thanks for your motivation Boob :thup2:

Hi,
It was a big job to do the botome of my ford grill a lot of work for the little part like that :doh:
http://img443.imageshack.us/img443/9011/1004753.jpg

Getting good with a torch....
 

...and a hammer.

Now you will have to fill in that half moon hole cut out of the front bumper...... it never ends.

The flat stuff is not too hard ....it is shaping some of the curved parts that will give you a headache.

Keep sluggin' at it.

Boob

Hi,
could anyone give me a pic of a 1945 front so i could do a reproduction of that braket :giveup

Hi,
Never mind did my bracket and look find :D
http://img535.imageshack.us/img535/2165/1004754.jpg

Hi,
If this code DuPont No. 1070-019
of color is the right one for a 1945 ford truck :giveup
thx

Hi,
Here the new driver flor i juste did :yappy: happy to found the same pattern :drunk: i wonder if someone have a pic juste to be sure i did want to drill hold that is not supposed to be there :giveup
http://img708.imageshack.us/img708/4434/1004760.jpg

Hi,
Anyone have a bracket like this one for my Ford projet :giveup
http://img12.imageshack.us/img12/6853/april204.jpg

Which part...?
 

The bracket....or the handle....or the part with the teeth for the rachet to hold the brake lever in place....?

Handles and teth part availalble at MAC in NY.....bracket may be unique to Ford CMP....

Will check the back field....

Boob

Hi Boob,
The bracket only :giveup i ave 2 handle and all the part :bang:
Here a pic that what i ave
http://img34.imageshack.us/img34/7411/1004765t.jpg

Hi Gang ,
Here the next generation pushing his dad to fini the truck so he could have a drive :teach: i did a promise it will be finished for his graduation so i ave sometime :rolleyes
http://img80.imageshack.us/img80/3048/1004763.jpg

Hi,
I forgot i looking for some bridge plate if anyone could help me :giveup and if the US bridge plate are the same size of the cmp one :giveup

Hi Bob,
Did you got a chance to look for a bracket :note:

Braquette.....
 

Hi Eric

Yes I did find one....but only one....... would be easy to duplicate out of 2 inch by 3/8 stock...... but would be expensive to ship....

After the BBQ I will take exact measurements..... and photos and post on MLU....

Bob C