MLU FORUM - Bearing ID needed

MLU FORUM (http://www.mapleleafup.net/forums/index.php)

- Parts/Sources/Prices (http://www.mapleleafup.net/forums/forumdisplay.php?f=25)

- - Bearing ID needed (http://www.mapleleafup.net/forums/showthread.php?t=12657)

Hanno Spoelstra

29-03-09 15:30

Bearing ID needed

2 Attachment(s)

Please identify this bearing for me:

Marked "Ahlberg 928".

Measurements:
OD: 2.246"/ 57,05 mm
ID: 0.86"/ 21,76 mm

Thanks,
Hanno

Hanno Spoelstra

29-03-09 19:19

Quote:

Originally Posted by Hanno Spoelstra (Post 111762)

"Ahlberg 928".

Is this one of those elusive CMP king pin bearings?

Thanks,
Hanno

Grant Bowker

30-03-09 00:41

I have just measured the Aetna 1570 bearings as having OD 2.212", ID .0875". The set of Aetnas we used in Bob Carriere's front axle were a snug fit both into the housing and to the axle pivot pins. In appearance the Ahlberg 928 bearings are very similar to the New Departure 928 bearings.

Hanno Spoelstra

01-04-09 10:19

Quote:

Originally Posted by Grant Bowker (Post 111783)

In appearance the Ahlberg 928 bearings are very similar to the New Departure 928 bearings.

Thanks Grant,

That is what I thought, also because of the similiarities in part no.
I will remeasure the bearing to make sure about it´s sizes.

Hanno

Dirk Leegwater (RIP)

03-04-09 14:07

CMP (Ford-Chev) bearing assy.

1 Attachment(s)

In stock:

Front Wheel Pivot Pin.
C01Q-3123(B)
New Departure 928

Price: request

Dirk

All times are GMT +2. The time now is 05:51.