Wanted : Ford Blitz gearbox parts
Looking for the casting that fits on the output side of the gearbox that held the hand brake band and had the speedo cable mounting
|
The 4x2 F15 parts are unique to the F15, they are not the same as the commercial Ford trucks or Carriers.
All the 4x4 Blitzes (CMPs) had the handbrake and speedo drive on the Transfer Case. Do you need this for your 2Pdr Carrier? I think they used a standard Commercial Truck pattern item, not Blitz? :confused |
1 Attachment(s)
yep its for the carrier. The piece Im chasing is this
|
The Late Ford Commercial Truck item puts the output shaft at a higher centreline from the mounting base:
https://www.ebay.com/itm/1940-52-FOR...0AAOSwK1dcMmco The Earlier mount ('32-'39) has the lower centreline that your mount has. |
the later style are usable but you need to cut them down and do a bit of other work. Easy enough to do but I think I have managed to find the right one
|
All times are GMT +2. The time now is 04:32. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016