White M3A1 Scout Car bits and pieces for sale
 

Hi all,

I have the following bits and pieces left over from my White scout car restoration and they may be of use to someone else. Details and asking prices are:

• Steering arm = $35
  
• Hood latch = $5 (sold, pending funds)
  
• U bolt (several available) $15
  
• Shock absorber arms = $5 each (sold, pending funds)
  
• Clutch pedal = $25
  
• Shock absorbers (several available, all needing restoration) = $10 each (sold, pending funds)
  
• Hercules JXD fans: one in tidy restorable condition - $50 (sold, pending funds); one with a couple of good blades on it - $10
  
• Fan pulley and tensioner = $30 (sold, pending funds)
  
• Breather = $15
  
• Spark plug lead holder (good for a template) = $5
  
• Elbow = $15
  
• Handbrake assembly - missing some parts = $30 (sold, pending funds)
  
• Filterette box - missing top = $10
  
• Dashboard plate - should tidy up okay = $15 (sold, pending funds)

All prices are in USD and exclude freight. PM me please if interested and I'll provide a freight quote.

White Scout car bits and pieces for sale
 

The rest of the photos.

Scout car not included with the parts.

For Sale: White M3A1 Scout Car bits and pieces
 

Hi all,

I have a few more bits and pieces from my Scout Car restoration,along with what is left from what I listed before. This is what I have:

* M3A1 White Scout Car Base Shop manual = $20 USD
This is a spare photocopy I have of this manual which is complete as far as I know. Most of the pages are copied back and front although there is the odd page that is printed one side only. It is in good condition as per the photos.

* Rear seats = $400 USD each
NOS rear seats. 2 available.

* Axe bracket = $10 USD

* Wheel nuts = $5 USD each
One is NOS. The other is in good condition. One left and one right.

Brake backing plates = $25 USD
Two available in good condition.

* Steering arm = $35 USD

* Hood latch = $5 USD

* U bolt (several available) $15 USD

* Hercules JXD fan = $10 USD
With a couple of good blades on it.

* Breather = $15 USD

* Spark plug lead holder (good for a template) = $5 USD

* Elbow = $15 USD

* Radiator lower pipe = $20 USD

* Clutch pedal = $25 USD

* Filterette box - missing top = $10 USD

Prices exclude freight. Payment by Paypal. Please PM if interested.

Scout car parts
 

Hi all

I have a few of these White Scout car parts left over if anyone is after any parts:

* Axe bracket = $10 USD

* Wheel nuts = $5 USD each
One is NOS. The other is in good condition. One left and one right.

* Brake backing plates = $25 USD
Two available in good condition.

* Steering arm = $35 USD

* U bolt (several available) $15 USD

* Hercules JXD fan = $10 USD
With a couple of good blades on it.

* Breather = $15 USD

* Spark plug lead holder (good for a template) = $5 USD

* Elbow = $15 USD

* Radiator lower pipe = $20 USD

* Clutch pedal = $25 USD

* Filterette box - missing top = $10 USD

Prices exclude freight. Payment by Paypal. Please PM if interested.

scout car bits
 

hello I am in Australia and have just purchased a bit of a basket case scout car. Do you still have any of those parts that you listed? thanks scott

Scout car parts
 

Hi Scott

I have a few things left, along with some other stuff, now that I have the engine in and running.

I'll send you a list tomorrow and you can see if there is anything you want.

Scout car
 

Hi Scott,

Here are a few things I have left. Let me know if any interest you and I’ll send through photos and a price:

• Generator (repaired and working)
• Fuel sender parts (you may be able to resurrect it)
• Cluster gauge back surround (needs repair)
• Brake pedal piece (the foot end of it)
• Clutch pedal (complete)
• Carburettor bits and pieces
• Broken fuel pump
• Horn mount
• Vent assembly
• Oil filter housing
• Flexible fuel line (new)
• Sump gaskets (new)
• Carburettor Gasket set (new)
• Clutch pressure plate
• Engine armour plates
• Starter motor spacer adaptor
• Axe bracket
• Wheel nuts
• Brake backing plates
• Steering arm
• Axle U bolts
• Hercules JXD fan – damaged with a couple of good blades on it
• Engine breather and mount
• Spark plug lead holder (good for a template)
• Filterette box - missing top
• Thermostat housing
• Thermostat (new)
• Sump strainers (one NOS) both need small repairs to mesh
• Manifold heat shield – some small holes in it but perfectly useable
• Steering box – needs rebuild
• Steering rod and arm
• Water pump – needs rebuild


I also have pistons, bearings, valves, bellhousings, engine covers, transfer case parts etc.

Scout car parts
 

Hi all,

I have some parts left over from my Scout Car restoration. Asking prices are in USD, and exclude the ride there. It is a big job to photograph everything so if you are interested in something, let me know and I’ll photograph it or provide more details. I realise I am a fair way away so hopefully the prices reflect that. If you are interested in anything and want to make an offer, feel free. Note that I won’t be able to ship the goods until the end of our national COVID19 lockdown which is hopefully 3 -4 weeks away:

• Axe bracket = $10
• Wheel nuts. One left and one right= $5 each
• Brake backing plates. Two available in good condition = $20
• Axle U bolts = $10
• Hercules JXD fan. Rough but has a couple of good blades on it= $10
• Hercules JXD oil pump repair kit = $80
• Oil breather and mount = $20
• Spark plug lead holder (good for a template) = $5 USD
• Water pump elbow = $15 USD
• Radiator lower pipe = $20 USD
• Clutch pedal complete = $25
• Filterette box. Missing top = $5
• Generator (repaired and working) = $150
• Fuel sender parts (you may be able to resurrect it) = $5
• Cluster gauge back surround (needs repair) = $5
• Brake pedal piece (the foot end of it) = $5
• Carburettor bits and pieces = $10
• Fuel pump. Maybe good for parts = $5
• Horn mount = $5
• Vent assembly = $10
• Oil filter housing = $25
• Flexible fuel line (new) = $15
• Sump gaskets (new) = $5
• Carburettor Gasket set (new) = $10
• Clutch pressure plate. Surface rust = $30
• Engine armour plates. Heavy…
• Starter motor spacer adaptor = $50
• Thermostat housing = $40
• Thermostat (new) = $35
• Sump strainers (one NOS) both need small repairs to mesh = $60
• Manifold heat shields. Some with small holes but perfectly useable = $30
• Steering box. Needs rebuild = $25
• Steering rod and arm = $30
• Water pump. Needs rebuild = $50
• Hercules engine tappet covers = $10

I also have pistons, bearings, valves, bellhousings, engine covers, transfer case parts etc.
Please PM if interested. Payment by Paypal is okay.

Scout car - parts
 

Hello. Do you have any other parts for the scout car m3a1 - engine cover?
Regards
Adrian

Scout car parts
 

Hi all,

I have some parts left over from my Scout Car restoration. Rather than list a price, let me know if you are interested in anything and I’ll first work out a freight price and if you are happy with that, then you can make me an offer. I’m not fussed about making money and I’d rather the stuff just gets used. I’m a long way away so I know freight is a factor.

• Axe bracket
• Wheel nuts. One left and one right
• Brake backing plates. Two available in good condition
• Axle U bolts
• Hercules JXD fan. Rough but has a couple of good blades on it
• Hercules JXD oil pump repair kit
• Spark plug lead holder (good for a template)
• Clutch pedal complete
• Filterette box. Missing top
• Fuel sender parts (you may be able to resurrect it)
• Cluster gauge back surround (needs repair)
• Brake pedal piece (the foot end of it)
• Carburettor bits and pieces
• Horn mount
• Vent assembly
• Flexible fuel line (new)
• Sump gaskets (new)
• Carburettor Gasket set (new)
• Clutch pressure plate. NOS but it needs setting up before fitting
• Sump strainers (one NOS) both need small repairs to mesh
• Hercules engine tappet covers
• Distributor cap and leads

I also have Hercules pistons, bearings, valves, bellhousings, engine covers, transfer case parts etc.

Please PM if interested.