Need info on M38A1 Radio Tray Support Bracket 5820-21-847-3343
 

I am looking for dimensions and photos of the tray support bracket that goes below the MT-1029 tray on a fender of a M38A1. NSN 5820-21-847-3343
As seen in this photo, If I can't find one I will try to built it.

http://i399.photobucket.com/albums/p...08g62_20-1.jpg

Craig Harris
bbobbijo@telusplanet.net

I'll be home in a couple of months and should be able to scrape another one up. PM me sometime in May.

Ralph at Niagara Military Vehicle Parts has these as well.

IIRC, he sold me mine for $25 each plus postage.

Scotty

I phoned Ralph at Niagara Military Parts no luck there ,thanks.


Craig Harris
bbobbijo@telusplanet.net

So there's at least two of us depending on Rob to find us one each of these trays.

Rob...gentle reminder to follow in May.

Have a good one!

If your hard up for one, mine are currently out of my M151A2.

I can snap some pics with the ruler laid on it.

Scotty

I suppose it wouldn't be too hard to copy one with a sturdily mounted metal brake. The alternative would be to just weld something up instead of bending the metal. That was my alternate plan if I failed to find these.

I appologise for the quality of the pics. I've gotten lazy having this iPhone camera now.

Approx 1-1/4" thick, approx 3/16" thick metal.
http://www.surfacezero.com/g503/data.../IMG_01861.JPG

17" Across from mounting hole to mounting hole:
http://www.surfacezero.com/g503/data...m/IMG_0183.JPG

13-1/4" Deep
http://www.surfacezero.com/g503/data.../IMG_01841.JPG

3-1/2" Between Mounting Holes
http://www.surfacezero.com/g503/data...m/IMG_0185.JPG

If there is anything else, please feel free.

Scotty

Jon
I believe yours is already out in the shed waiting for me to get home and mail it. I can get more.

I will keep looking but if you can get one I would like it. Talk to you in May.

Thanks
 

Thanks for the pics. Ya it would be tough to bend one up, but it gives me a good look at it.

The top plate and the bottom plate aren't the problem. It is the donut (or doughnut, if you prefer) cushioning in between them.

also looking for tray
 

Hello folks

There are also several MV owners in the Ottawa area looking for this tray.

Thanks

Eric

If you guys can find them locally, then by all means go ahead. When I get back I should have no problem finding a reasonable number. I should be able to match Niagra's price, but then there is the postage. If some of you are in the same neck of the woods, I can send more than one in a parcel to make it a bit cheaper.

We'll see where it stands in May.

Put me down for one if there is an extra available. No rush - May is fine.

Regards, Peter Z.

radio tray
 

Hello Folks

I just picked up a tray from Niagara Military parts. He still has a few left.

Please remove two of us off from the want list in Ottawa.

Thanks
Eric

Still Looking
 

Still looking for a tray anyone out there have one as well as a corner antenna mount.:wacko: