Wanted: 8' CX-4720 Cable for the VRC-20
Hi Guys,
Just as the title says, I need an 8' CX-4720 for the VRC-12 System. My only one is a 14'er, and I'd really like to get a shorter one for a cleaner install. My local contacts only have 18'ers. Also, this is for the 4 Prong MT-1029 to MT-1029 Power Cable and not the one with the Bendix Connector. Hopefully someone has one or else I'll be experimenting with Solder and Heat Shrink. Scotty |
Hi Scotty,
Are you daisy chaining two RT524s to make a VRC49? The CX4720 has a 4 socket connector on one end and bare wires on the other. The CX4721 is used to connect two MT-1029s together but the cable is only 2.5 ft long. Just checking before I go digging through the junk box. Bruce |
Quote:
Your right. Jon Skagfeld my friendly Toaster Tech called me and sorted me out on the Cable Configs. Yes, it is in fact a 4721 I need. Did they make these in any shorter lengths? All I can find are either 14 or 18 footers. If an 8' footer was around, that would be great. Failing that, I have a link for a 10 footer. Thanks Scotty |
The Cable with these ends:
http://www.surfacezero.com/g503/data.../IMG_10094.JPG Its going from MT-1029 to MT-1029: http://www.surfacezero.com/g503/data.../IMG_10083.JPG Looking again today after work, i'm thinking I may actually need a 10' footer afterall. I know Jon, I know :) Scotty |
All times are GMT +2. The time now is 16:49. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016