A couple of oddball bits.
 

I thought I'd try here to find a few pieces I'm looking for. I'm hoping someone might have them in their spares box...???

First is a u-shaped metal strip used to edge the sliding glass windows on Chev HUP/HUW trucks. It is 13" long for 1/4" thick glass and was probably a common item in the day. Looking for one. See first pic.

Second, I need two twist fasteners like the one in pic 2. Maybe called a 'druz' and are still used. Shaft diameter is 5/16" (and as long as possible, I expect I will have to lengthen them regardless) with 1-1/8" butterfly wings.

The channels, called bailey channel , I know there’s a company here in Australia that make new ones but. , you can try him carter truck parts they may have new ones that you could cut down to suit

fasteners
 

the fasteners are commonly used in aircraft applications. find a supplier of aircraft parts and you will probably find the fasteners.

The spelling is Dzus.
Possibly useful links
https://www.southco.com/en-us/prohtt....html?hid=7345
https://www.aircraftspruce.ca/menus/ha/fast_1dzus.html
http://spenceraircraft.com/hardware/...fasteners.html
https://www.quickreleasefasteners.com/
http://aircraftproducts.wicksaircraf...-type-fastener
The only one of the companies above that I have dealt with is Aircraft Spruce - I found it a good experience.

The fasteners are also used on R and S series Bedfords to secure the internal engine covers. I think that I have a few if you can't find any closer to home.

They are also used on D series Fords to hold the covers on the front of the cab over the brake and clutch master cylinders.
Ken