JAP Generator
5 Attachment(s)
I picked up two 1250w 36v JAP Generators at the weekend.
The data on the plate gives the year of manufacture as 1943 and a model 5 engine? Both sets were rebuilt during either 1960/61 at 32 or 34 base workshops. Wireless for the Warrior list this set as a general purpose set (battery charging?) with similar sets being manufactured by Villars and Douglas amongst others. The sets are mounted in a torsion bar mounted anti-vibration mounting within the frame. Presumably the mounting frames and Generator are identical with only the engines differing. Does anyone have manual for this set or a plug for the generator. The second set stripped down to its major component items is also available for sale or exchange for other war-time generators. |
I think these have come up before
Hi Neil
I thing these and a similar JAP generators have come up before on MLU in the responses there was a link to a site that a great amount of rebuild info. Not sure of the model though, I have a JAP generator that is of a different but similar design. My JAP unit came with my HUP which was ex-BBC so I surmise that it was two charge the battery pack for the recording equipment. Mine is none running condition, a project for the future. I never have much luck search back through MLU for old threads, so maybe someone who is a better searcher can find that previous thread. If not I'm pretty sure I saved the links and printed out some of the pages, I'll look for them. Cheers Phil |
Phil
From memory the set you had was the small one with handles at each end normally associated with RAF starter trolleys. This is a two man lift item using stretcher handles through the frame. Even then it is a hernia inducing experience and best with four people. I would assume they were carried in Battery Charging trucks at squadron/company level where large number of batteries would have required attention. Presumably being rebuilt so late this was the prefered war-time model. |
|
Quote:
I have one of these 1260w Battery Charging sets with the Petter AS single cyl engine. We were still getting these in for repairs in the 1970's ( Petter and JAP from recollections). I think there was another engine make, Norman, an opposed flat twin. Frames may have varied slightly to accomodate the different engines. The Petter had a cylindrical petrol tank and a tool box mounted at the top of the frame. Do you have the Switchboard cabinet to go with it? There is a 10 foot lead to connect to it. As for weight, in my handbook, it shows it as just over 3 cwt. |
Richard
The switch boards or control panels with some of my sets are the first thing to disappear when these sets are released. A picture of what I am looking for would be useful. |
Quote:
My own set is dismantled and stacked away somewhere, so no photos of the Switchboard, but here are some details of it, It is a steel cabinet, with doors on the front and a folding lid to protect the panel when in operation. Size is Height: 20", Width: 18.5", Length: 9.25". The designation is Switchboard, Charging, 1260watt, No.1 Catalogue No. ZA 6573. The JAP powered set was known as No.5, and the Petter one was No.3. |
All times are GMT +2. The time now is 05:24. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016