Push rods wanted for C8A shockabsorber
All,
For my HUP I'm in need of the pushrods (front and back) that go from the Hydraulic absorber to the springleafs. Anybody any leads?? Thanks Pieter |
What do they look like?
David |
Pushrod pic
1 Attachment(s)
I have only a small pic to upload, hope you get an idea
|
Shocker links. May be common part?
The detail is not good enough to know for sure Pieter but that shocker link appears to be similar to the late pattern CCKW, Studebaker US6 and Dodge WC Link.
These links varied in length but the ball ends could be pressed out and changed as a unit or the rods cut and joined to get the required length. If they attach with a taper and a nut, which appears to be the case, I think your problem may be solved. I have NOS Studebaker links but you should get CCKW or Dodge links or ball ends much closer to you than I am. David |
pushrod
Indeed the WC51 has almost the same but they need to be altered but I found a place here in Holland
|
All times are GMT +2. The time now is 04:06. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016