MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Softskin Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=5)
-   -   F 30 brake cylinders (http://www.mapleleafup.net/forums/showthread.php?t=28976)

Andy Mitchell 04-06-18 14:45

F 30 brake cylinders
 
Hi all,

I am having brain fade here, are the front brake slave cylinders on an F30 LAAT 1 3/8 inch ?

Jacques Reed 04-06-18 23:35

Ford CMP brake cylinder sizes
 
Hi Andy,

That is correct.

Front cylinders 1-3/8" bore and rear cylinders 1-1/2" bore.

Cheers

Andy Mitchell 08-06-18 14:44

Thanks for confirming what I thought.

Does anyone in UK know where I can get a new cylinder ?

Cheers,

Andy

Marc van Aalderen 08-06-18 22:06

Andy,

Did you try Leegwater? Can bring them over for you as usual. Will be going to Tankfest end of June.

Cheers,

Hanno Spoelstra 09-06-18 21:09

1 Attachment(s)
Andy,

Would this be of help?

Regards,
Hanno

Attachment 100192

Andy Mitchell 11-06-18 14:29

Hi Marc and Hanno,
Stefan tells me he has a cylinder and is coming back to me later this week, so I will let you know.
Problem is I am in Belgium for work but should be able to get on e-mail.
Cheers,

Andy

gjamo 12-06-18 08:15

WC4571 cylinder
 
https://www.ebay.com.au/itm/Drum-Bra...MAAOSw1xpa1gL5

Mark Towers 14-06-18 16:03

F60 size
 
Hi all,

May I quickly jump onto this thread and politely ask what are the correct size break cylinders for the F60 ? (Front and rear)

A rear cylinder on my F60 LAAT is sticking on and I need to investigate? Perhaps time to change all cylinders front and rear ? Can they be purchased here in the U.K. ? does anyone know any good suppliers over seas ?

Kind regards,

Mark

Hanno Spoelstra 14-06-18 21:20

Quote:

Originally Posted by Mark Towers (Post 251111)
May I quickly jump onto this thread and politely ask what are the correct size break cylinders for the F60 ? (Front and rear)

A rear cylinder on my F60 LAAT is sticking on and I need to investigate? Perhaps time to change all cylinders front and rear ? Can they be purchased here in the U.K. ? does anyone know any good suppliers over seas ?

Hello Mark,

See Jacques' remark above: Front cylinders 1-3/8" bore and rear cylinders 1-1/2" bore.

Also search the thread "Modern Part Numbers for CMPs" for various supplier part numbers - here is one of the options: http://www.mapleleafup.net/forums/sh...040#post123040

Dismantle the brakes and check the cylinders, if they are in good order you will only need new cups. Is the cylinder walls are pitted have them resleeved or buy new, complete cylinders off the shelf.

HTH,
Hanno

rob love 14-06-18 22:29

Quote:

Originally Posted by Mark Towers (Post 251111)
Hi all,

May I quickly jump onto this thread and politely ask what are the correct size break cylinders for the F60 ? (Front and rear)

A rear cylinder on my F60 LAAT is sticking on and I need to investigate? Perhaps time to change all cylinders front and rear ? Can they be purchased here in the U.K. ? does anyone know any good suppliers over seas ?

Kind regards,

Mark

Rears are WC4511. A search on ebay shows plenty of them starting at around $45. If shipping gets obscene, you can also check rockauto.com for the same part number and see if that works out better.

Andy Mitchell 10-07-18 15:00

Hi Hanno, is that a new cylinder ?

Hanno Spoelstra 11-07-18 00:15

Quote:

Originally Posted by Andy Mitchell (Post 251794)
Hi Hanno, is that a new cylinder ?

Hello Andy,

The one I posted a photo of is used, but cleaned and repainted.

If it is of any use to you, I would gladly send it over to you for the cost of postage plus a small donation to MLU (to be determined by yourself).

Regards,
Hanno


All times are GMT +2. The time now is 18:28.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016