M113a1 radiator needed
Hi all going out on a limb here looking for a radiator for a m113a1 restoration going on at the museum and we need a radiator the one we have is rusted out.
Thanks all Tyson |
Hi Tyson
any chance it is the same as the AVGP family? I have a dozen of those NOS in crates. John |
Not the same, and if you are working on a M113A1 (and not an A2) you have to be careful not to get a lynx radiator. It will fit in the same spot, but is not as big. I had to change a bunch of those rads back in the early 80s because of the difference...had it down to about an hour and a half a rad.
I actually think I saw a couple of 113 rads out at my favorite surplus yard the other day. Next time I am out, I'll have a dig and see if I can find them. In the back of my head, I am thinking they are new and stored indoors. |
Thanks guys unfortunately the avgp rads won't work as they are way diffrent. Rob we were unaware that the rads were different would a 113 rad work in a lynx?
Thanks for your help |
If the clearance is there, and I suspect it is, then it should. As I mentioned, guys were installing the lynx rads into M113s without noting the difference.
|
All times are GMT +2. The time now is 22:08. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016