CMP parts needed ..........
 

Happy easter all on MLU around the globe :salute:

Well still looking for a LH upper gun mount clip and bracket to bolt to back cab wall if anyone has one pls PM or Email me

Also need a bridge plate in yellow like OEM for the RH front corner , I have to small brakets on the lip of the fender so assume the plates all have 2 small holes in them to fasten there, If anyone has a decent one pls again PM or email me.

Well I think Ill go out and hide my own easter eggs , problem I have is I cant remember where I put them :doh: :D

Br Cl Plates
 

Terry, Go to the Calwell Bros website http://www.c-broadarrow.ca/vparts.htm and scroll down. You can get a good plate from the boys from Chatsworth.

Thanks RH

Im in touch with Dan to get one, are the OEM ones steel or aluminum ?, painted or skinned with something ?, painted both sides ?

never seen one so I know silly questions :doh:

Terry,

This CMP Ford F15A has had its original bridge classification plate refitted when being restored. It is flat and has the size of a CMP headlight aperture. It has four holes along the edge, to fit the plate in place of the headlight, plus two more holes towards the centre to attach it to the truck in case two headlights are fitted.

http://www.surfacezero.com/g503/data.../imm035_36.jpg

Hope this helps,
Hanno

Thanks Hanno for youir info.

I can get reproductions but would like to exhaust my efforts on finding a NOS one or good used one first, I also would like to use my two tabs and mount by the fender as I have blackout light covers for the headlights.

Original Mirrors
 

HI Terry

You also need original mirrors.

lol

Adame :no4: