MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Gun Park (http://www.mapleleafup.net/forums/forumdisplay.php?f=26)
-   -   25 pdr question (http://www.mapleleafup.net/forums/showthread.php?t=13253)

Mike Timoshyk 06-08-09 03:07

25 pdr question
 
What size tires fit on the 25 pdr?


cheers

Mike Timoshyk

Mike Timoshyk 06-08-09 05:04

got the answer
 
got the answer ....thanks Bruce.

mike

cantankrs 07-08-09 03:51

Tyre size
 
Hi Mike,

Could you post the answer here for our benefit? :)

Regards

Alex

Bob McNeill 07-08-09 10:38

tyres
 
I run 900.16s on mine depending on rims as the amount you trim off as the 3 piece gun rim has a slight taper against the blitz straight 2 piece. When the tyre is not registerable for the truck it goes on the gun . My old 1944 chevron are for show only

Bob McNeill 08-08-09 06:38

tyres
 
4 Attachment(s)
the last tyre is on the limber but still 9.00/16

cantankrs 09-08-09 16:22

Tyre size
 
Thanks Bob.

Someone tried to tell me 20.00's a while back.

We do happen to have a riveted trail with 20.00's and suspect they might be original. The trail looks just like a 25pdr trail (as far as I can tell) and came with wooden round seats - is that any kind of clue? Did another caliber howitzer use the same trail? as the 25pdr?

Regards

Alex

Mike Timoshyk 09-08-09 16:54

tires and size...
 
1 Attachment(s)
Here is a pic of a 25pdr at the Kingsville museum here in Southern Ontario

Was there yesterday and the tires are 900x16. With 3 piece split rim.


cheers from damn hot Windsor Ontario...

Mike Timoshyk

Bob McNeill 10-08-09 10:40

20s
 
I,d like to see a pic of the 20,s, they would run very close to the turntable if fitted. the blitz rim and 25pr rim have a different offset BUT the bolt holes line up so if no 16s available bolt on whatever to get it home.


All times are GMT +2. The time now is 01:24.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016