cfr numbers.
 

hi.just wondered if craig could check on a couple serial no. the first is serial 100037 its a 1970m38a1.its a 106 jeep,cfr70-08666.the second jeep is serial no 97530 and its a 1968 m38a1.no cfr on jeep anywhere.thankyou.regards jim.

Jim -

About your Jeep - CFR# 70-08666 - Truck Utility ¼ T0n Willys M-38A1CDN3 106mm RCL Rifle
Serial No. 100037
ECC - 123310
ERN - 30104
Acquired Date - 01 Jan 1970
Original UIC - 0126 CFB Ottawa (now dormant)
Holding Unit History - 01 Jan 1970 to 06 Feb 1986, UIC 0114 CFB/ASU Kingston
Modification history shows x2 completed. Publication reference 30-010-000/CF-003 and 30-104-000/CF-002. No other details available.
Completed Work Order Details are as follows:
- 07 Feb 1977, Holding Unit UIC 2208(?), Adm(Engineering and Maintenance), 3 RCR. Preventative labour by Trade 411 Veh Tech for 3.0 hours.
- 30 April 1978, Holding Unit UIC 2208(?), Adm(Engineering and Maintenance), 2 Svc Bn Maint Coy. Preventative labour by Trade 411 Veh Tech for 8.0 hours.
- 21 Oct 1978, Holding Unit UIC 2208(?), Adm(Engineering and Maintenance), ASU Kingston. Preventative labour by Trade 411 Veh Tech for 3.0 hours. $9.00 in parts.
- 17 May1979, Holding Unit UIC 5096, The Brockville Rifles, ASU Kingston. Modification/Conversion and Preventative maint. labour done by Trades 101(?), and 411 Veh Tech for a total of 1.5 hours for mod and 18.0 hours preventative. Mileage listed as 12592. $17.00 in parts used.
- 30 Nov 1979, Holding Unit UIC 5096, The Brockville Rifles, ASU Kingston. Preventative maint labour by Trades 101(?), and 411 Veh Tech for a total of 10.0 hours. Mileage listed as 15409. $170.00 in parts used.
- 13 Mar 1980, Holding Unit UIC 5096, The Brockville Rifles, ASU Kingston. Preventative maint labour by Trades 101(?), and 411 Veh Tech for a total of 4.5 hours. Mileage listed as 15706. $24.00 in parts used.
- 19 June 1980, Holding Unit UIC 5096, The Brockville Rifles, ASU Kingston. Preventative maint labour by Trades 101(?), and 411 Veh Tech for a total of 7.0 hours. Mileage listed as 16837. $33.00 in parts used.
- 04 July 1980, Holding Unit UIC 5096, The Brockville Rifles, ASU Kingston. Preventative maint labour by Trade 101(?) for a total of 2.0 hours. Mileage listed as 16837. $1.00 in parts used.
- 08 Dec 1980, Unit UIC 5096, The Brockville Rifles, ASU Kingston. Modification/Conversion and Preventative maint. labour done by Trades 101(?), and 411 Veh Tech for a total of 2.0 hours for mod and 10.0 hours preventative. Mileage listed as 18380. $6.00 in parts used.
- 19 Feb 1981, Holding Unit UIC 5096, The Brockville Rifles, ASU Kingston. Preventative maint labour by Trades 101(?), and 411 Veh Tech for a total of 9.0 hours. Mileage listed as 18380. $31.00 in parts used.
- 21 April 1981, Holding Unit UIC 5096, The Brockville Rifles, ASU Kingston. Preventative maint labour by Trade 411 Veh Tech for 0.5 hour. Mileage listed as 18380. $9.00 in parts used.
- 09 Nov 1981, Holding Unit UIC 5096, The Brockville Rifles, ASU Kingston. Modification/Conversion and Preventative maint labour by Trades 101(?), and 411 Veh Tech for a total of 20.5 hours for mod and 0.5 hour preventative. Mileage listed as 19993. $25.00 in parts used.
- 02 Mar 1982, Holding Unit UIC 5096, The Brockville Rifles, ASU Kingston. Preventative maint labour by Trade 101(?) for a total of 3.0 hours. Mileage listed as 20561.
- 11 June 1982, Holding Unit UIC 5096, The Brockville Rifles, ASU Kingston. Corrective and Preventative labour by Trades 101(?), and 411 Veh Tech for a total of 18.0 hours for corrective and 2.0 hours preventative by 411 Veh Tech. Mileage listed as 20740. $297.00 in parts used.
- 16 Aug 1982, Holding Unit UIC 5096, The Brockville Rifles, ASU Kingston. Corrective and Preventative labour by Trades 101(?), and 411 Veh Tech for a total of 3.5 hours for corrective and 6.0 hours preventative. Mileage listed at 22693. $122.00 in parts.
- 07 Jan 1983, Holding Unit UIC 5096, The Brockville Rifles, ASU Kingston. Preventative labour by Trade 101(?) for a total of 0.5 hour. Mileage listed at 22922.
- 23 Nov 1983, Holding Unit UIC 5096, The Brockville Rifles, ASU Kingston. Corrective and Preventative labour by Trades 101(?), and 411 Veh Tech for a total of 15.0 hours for corrective and 5.0 hours preventative. Mileage listed at 28329. $185.00 in parts.
- 13 June 1985, Holding Unit UIC 0114, 2 GS Bn 1st Line, CFB/ASU Kingston. Preventative labour by Trade 411 for 2.0 hours. Mileage listed as 33151.
- 01 Oct 1986, Holding Unit UIC 0126, CFSU Ottawa, CFB Ottawa. Preventative labour by Trade 411 Veh Tech for 3.0 hours. Mileage listed as 34534.
- 01 Oct 1986, Holding Unit UIC 0126, CFSU Ottawa, CFB Ottawa. Preventative labour by Trade 411 Veh Tech for 5.5 hours. Mileage listed as 34534.
VMO No.DP358791, dated 08 Feb 1987, for disposal. Vehicle disposed of 15 June 1987 in Serviceable condition. Sold for $2653.00. Last Holding Notice was 09 Nov 1987.
Sorry for the slow response, but there’s all the listed info. As for the second Jeep, are you sure it's Canadian because as far as I am aware of and I may be mistaken, but we did not have any M-38A1's of the 1968 model year. However - it may be a 1967 M-38A1CDN2? If the year was a typo than I'll have a look tomorrow if you like. Cheers,

Craig

Craig
The majority of the Cdn2 jeeps were actually delivered in 1968. I think they used the contract year (67) in front of the CFRs.

cfr jeep
 

hi craig.thank you thankyou very much.great to have that history.also rob is correct on the other jeep.thanks rob for posting that.regards jim.

That makes sense to me Rob. Jim - you're quite welcome. I did find the CFR that matches Serial No. 7105-97530. It comes back as 67-08263. Standard Truck, Utility, 1/4 Ton, 4x4, M-38A1CDN2. ERN 30103 and ECC 121201. Originally out of CFB/ASU Kingston. Sorry Jim but thats all I can get right now. I have to leave work early today so I'll get more info tomorrow for you. Cheers,

Craig

Jim -

I haven't forgotten the info, in fact I have it but I'm trying to change it from a .doc to a PDF to save on my typing(pecking really). If anyone knows how to do that don't be shy to give details. I can however get the .doc into the .jpg format, but I'm not sure how clearly you may be able to actually see the screen shot. Please advise if this would be okay in the meantime. This computer at work doesn't have a good program for editing photos. Cheers,

Craig

Well I hope this is going to work. It works at home - so when it leaves here, I hope it works out there. I took screen shots of the EDR Viewer application from work and saved them to Word. It all had to be converted to a .pdf file and then split up due to size restrictions on the upload. Cheers,

Craig

cfr s
 

thank you once again craig.regards jim