Spare wheel carrier...pics needed
 

Does anyone have any close up pictures of the spare wheel carrier on a c15? I need some for concidering making one from scratch...

Please email me

thanks

Svenn

Spare wheel carrier
 

Svenn,

Is it the same as F60s?

I have one in my workshop in very good shape, and I can pull it out and photograph next weeekend if it helps.

Are there any particular areas you would want photos of?

Tony B

Hi.

Sorry for the late reply. I have no idea if it is the same..but pics are anyway apriciated

Svenn

c15
 

our australian tire racks differ from the rest, but the clam shell ones are shown in a previous forum.

Sven,

George McKenzie, one of our members made plans to suit your needs, see Plans How to build a tool box for a CMP truck.

HTH,
Hanno

Hello,
I am not a CMP man but I took this photo of a spare tyre carrier at Ken Hugh's property years ago.
Not sure if it is the one you want but it may help someone :)
Cheers
John W.

John

Great photo shows good old Ausie ingenuity, use of whatever is lying around and nothing that can't be fixed with a piece of fencing wire.

Tony

That is the Australian Pattern spare wheel carrier and rear bed. :)

Cliff,
I have more detailed photos of this truck and in particular of the wooden tray. I can post them here if there is an interest in it.
Cheers
John W.

John I'd love to see the detailed photos. When I was at Kingaroy I concentrated on Photos of the trucks themselves as I was unaware at the time just what was original or not in the rear beds fitted. :thup2:

Cliff,
Here you go :)
Cheers
John W.

Attachment 41899 Attachment 41903
Attachment 41900 Attachment 41901 Attachment 41902

Next lot
Cheers
John W.

Attachment 41904 Attachment 41905 Attachment 41907

Attachment 41906 Attachment 41908

And more to follow :)

Attachment 41910 Attachment 41911

Attachment 41909 Attachment 41912 Attachment 41913

Spare wheel carrier
 

HI Svenn I can send you plans for the carrier that goes behind the cab .The tire sits on top of the tool box . Is that the one you want ? I sent over 60 copies out from Findland to AUS . The clamps to hold the tire could be made by taking an original one and make a mold with using cement , one for each side of the clamp .Then use a press to form a new one .