MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Softskin Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=5)
-   -   Sale time (http://www.mapleleafup.net/forums/showthread.php?t=16408)

Bob McNeill 09-04-11 14:01

Sale time
 
5 Attachment(s)
Spent some time today at a clearing sale 100K,s away, a bit of blitz stuff, an old crane $1500, most stuff mixed in with junk, local hoarder bought most car and truck bits [ won,t sell just buys at top dollor ]

Keith Webb 09-04-11 20:36

Report
 
Quote:

Originally Posted by Bob McNeill (Post 145557)
Spent some time today at a clearing sale 100K,s away, a bit of blitz stuff, an old crane $1500, most stuff mixed in with junk, local hoarder bought most car and truck bits [ won,t sell just buys at top dollor ]


Thanks for the report Bob. Love the shot of the Landcruiser:
"Just.... one.... more.... part.... to.... load...."

http://www.mapleleafup.net/forums/at...6&d=1302350210

Bob McNeill 10-04-11 08:31

one more bit
 
5 Attachment(s)
There where several trucks that went out with funny loads, being a engineering w/shop there was a lot of steel offcuts and frames, when the old chap made things he did it well, benches had 3/8" or more tops, old steam pipe used because it was cheap. Interesting set up for crane, from truck transfer case back to inverted transfer case, general lifting done with normal drive, lifting jib driven from front axle drive, all blitz parts includeing winches.

hrpearce 10-04-11 12:18

Looks like the Toyota owners should have brought trailers, on the positive side the front tyres wouldn't have worn much on the way home.

Bob McNeill 10-04-11 13:19

light steering
 
Rob the first toyota has a box trailer which also sat pretty low, the second one was not fully loaded the old hacksaw on the ground at the rear went behind the cab THEN the 3 axle car trailer also loaded. note the sheets of iron sticking out the back.

hrpearce 10-04-11 13:31

Hi Bob I see the trailer on the first one now. All I can say is an RTA inspector could have goten writers cramp with those two.


All times are GMT +2. The time now is 20:21.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016