MLU FORUM - Bracket ID Required

MLU FORUM (http://www.mapleleafup.net/forums/index.php)

- The Carrier Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=6)

- - Bracket ID Required (http://www.mapleleafup.net/forums/showthread.php?t=16986)

B. Harris

06-08-11 02:03

Bracket ID Required

2 Attachment(s)

Can some one please ID this bracket. It is mounted in a Canadian MK II, drivers side, rear, on the inside on the upper back wall. It would be behind the spare Bren barrel box, IF a box was mounted. There also appears to be another one of the same type located just behind the drivers head and below the air intake scoop in the Driver/Gunner compartment. Again there are no part numbers visible.

Ron Pier

06-08-11 10:10

1 Attachment(s)

They are refered to as "HARNESS BRACKETS" with various different part numbers. My own MK2 Canadian has the holes in the back plate behind the Bren barrel box. But no bracket. Perhaps we can be enlightened as what they're for? Ron

All times are GMT +2. The time now is 01:13.