MLU FORUM - Track Jack ID Required

MLU FORUM (http://www.mapleleafup.net/forums/index.php)

- The Armour Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=7)

- - Track Jack ID Required (http://www.mapleleafup.net/forums/showthread.php?t=16987)

B. Harris

06-08-11 02:08

Track Jack ID Required

2 Attachment(s)

I have had this item for many years and I really want to know what it fits.
Can any of you tank heads help me out here.
Thanks in advance,
Harris

Perry Kitson

06-08-11 14:05

Track jack is for use on double pin Sherman track. The two pronged attachment on the bottom is for pulling off the end connectors.

Perry

andrew honychurch

09-08-11 20:51

prety sure it is the same as a Stuart M5 and M5A1 as well

tankbarrell

10-08-11 18:29

It is actually an M3 Stuart jack. The end connector puller parts proved to be not man enough for Sherman and though issued for use was replaced with a modified version which substituted the stub pin with a jaw to put the pin in shear.

All times are GMT +2. The time now is 08:56.