C8a front bumper
 

Gentlemen: On the front bumper of Chev C8A, there are 2 holes, one at either end. Can anyone out there tell me how far in from the end they are and what is the diameter. Imperial measurements, if possible. Many thanks.....Robert

Clarification
 

Hi Robert

Wanted to clarify which bumper holes you are speaking about, below is a picture of the end of my 1941 C60L. but I think it is the same.

Cheers Phil

bumber holes
 

they are for "jewel" reflectors, mine are green, and too expensive

C8A Bumper
 

Hi Phil and Dennis: Thanks for the insite and the quick reply. Phil, the photo you included is the what I'm looking for. My question is ...how far are the holes in from the end of the bumper and what diameter are they?

Dennis, I'll give you a call later in the week about stuff!

Cheers....Robert

2 inch hole
 

Hole is 2 inches diameter with the center of the hole 2 inches in from the end and centered vertically. Bolt hole for the jewel bracket are 3/8" ID and are centered fore and aft on the top and bottom of the bumper and centered to the 2 inch hole.

Hope that helps

Phil

Thanks Phil
 

Phil: Many thanks for the quick reply. Will be working on that over the next couple of days. Will be in touch.....Robert