What vehicle is it ?
 

What vehicle is it ? (click to enlarge)

http://cgi.ebay.fr/Photo-Camion-Mili...item5d31d814eb

It is obviously not 1935, and not Ford DAF Trado.

A Dutch conversion
 

I remember this one from Bart's observer's book and also I think there was an article in Wheels and Tracks. Was it based on a F15A with the Trado bogie? Looks like a GMC front axle.

I also see it has the late type crank handle guide and bumper. Looks like the large steering box bracket to so maybe a 3-tonner.

Here's the pic so it doesn't disappear.

http://idisk.me.com/oldcmp.net/Publi...111-210251.jpg

Not 1935 perhaps
 

... but the sign on the ground in front of it does say FORD DAF TRADO, and it has 1935 on it ....

The sign says "Ford with DAF TRADO, year of construction 1935". This was a post-war conversion of a CMP truck with the pre-war TRADO system which converted a single axle into a four-wheel drive bogie. Obviously it did not catch on, possibly because of the surplus of military trucks early after the war. Later, Marshall Plan funds became available, so DAF got to build new trucks which employed a similar, but improved system.

I've always wondered where this prototype went .... was most likely scrapped.

H.

Looking at the truck next to it in the picture, one can see the extreme movement of the axles for passing over rough terrain. That would explain why the cargo box is so high above the frame. I am pretty sure that would also have been a negative on the future production of the truck. For the very marginal amount of time that you would ever be in the situation of having to use the full travel of the suspension, you are forever doomed to having to lift your cargo to shoulder height to load the cargo box, or else satisfying yourself with the very limited space on the lower floor between the wheel wells.

Is that not a 13 cab scammell 30 cwt.. In 38 ford was doing proto type for these and is it not the same suspenion style as the m20 built by Ford
I believe there was not a lot of them built When I find the right book In will scan the pictures

Scammell
 

No, that conversion was done on a pre-war prototype around 1938. This is definitely post-war.

The TRADO conversion was similar to the Scammell set-up, but it differed in the sense that is was meant to bolt to a regular axle to convert a civilian 4x2 truck into a 6x4 off-road artillery tractor.

The Scammell bogie was one unit, fitted to trucks at the factory. The M20 armoured car has a double rear axle setup like on most trucks with two rear axles using inverted springs.

See the TRADO pics below. As far as we know, only one TRADO conversion survives.

Regards,
Hanno

Thanks for the info on the difference
I have only work on 1st and 2nd ww machines after 45 they where out of date
See you are never to old to learn (maybe)
I will probably forget tomorrow
The Trado system is basically the same drive that was used on the 6 wheel drive graders

That truck in the background is the post-war DAF YA-328, a purpose-designed artillery tractor and cargo truck for the Netherlands Army. This used the same basic "walking beam" principle as the pre-war TRADO, albeit it was not available as an after market four heel drive conversion kit. They served well from the mid-1950s till the late 1970s. Their development and production was funded through the Marshall Plan.

Here's a vid of it in action: http://youtu.be/2kLOitkqY1I

Plus a picture of the chassis, which was also used for an armoured car.

H.

More Dumb questions !
Was theTRADO design a worm gear drive or a Chain drive from the drive of the rear end to the individual rear wheels > it would be interesting to see a
complete set up with drawings

Concerning Details
 

HI

As Hanno mentioned there was a Wheels & Tracks article on this drive system as I remember a very interesting one.

Next question, are back issues of Wheels and Tracks old issues still available?

Cheers Phil

Yes, of course.

Your first helper - E-Bay (see an example):

http://www.ebay.com/itm/WHEELS-AND-T...#ht_774wt_1396

Probably, second helper (see an example):

http://www.amazon.co.uk/WHEELS-TRACK.../dp/B003Z3MXAY

And WHOLE COLLECTION is here - "Every issue, from No.1 to Final Issue No.75" !

http://www.milweb.net/classifieds/la...d=56622&cat=11

Stew,

It made use of bevel gears. Attached goes a picture of the last remaining TRADO wheelset.

Also see http://en.wikipedia.org/wiki/Trado

Hanno

Actually, £100 for all 75 issues is a bargain. The cover price when originally published ranged from £1.75 (issue 1) to £3.25 (issue 74, there was no cover price on issue 75).