Towing hitch brackets
 

Hello guys!

I am looking for the frame brackets for the towing hitch on my Chevrolet CMP.

I have the hook and the blade spring, but not the brackets for mounting this to the frame.

I have for trade these brackets that came off F60 (they didn't fit :( - just almost...) + an extra hook/hitch

Svenn
norway

Tow hitch
 

Might be able to help you. Send me a PM with email address and I will send photos of a couple I have for sale. Might be what you need

Brackets
 

There are two main types, the ones which fit inside the chassis rails as used mainly on Chevs and the other type which fit onto the outside of the chassis as used mostly on Fords.

Hi jack - you got a PM :thup2:

As for the brackets - i got hold of a set from a F60. I thougt they would fit, all holes were in the same position, but the bracket itselve had a slightly different size. :eek:

On my Chevrolet there are four holes, two upper and two lover in the vertical section of the chassis for mounting these bracket. But I have also seen on a C15 these brackets mounted with three bolt on a row.

Heres a (bad) picture of my frame with the four holes on the left side.
http://www.surfacezero.com/g503/uplo.../IMG_09385.JPG


And heres the brackets on a C15:
http://www.surfacezero.com/g503/uplo.../IMG_08596.JPG

Here are som more pics of ford brackets and chevy frame. As you can see holes are in same position and it almost fits, but only almost:wacko:

http://www.surfacezero.com/g503/uplo...1/Foto1205.jpg

http://www.surfacezero.com/g503/uplo...1/Foto1206.jpg

http://www.surfacezero.com/g503/uplo...1/Foto1207.jpg

http://www.surfacezero.com/g503/uplo...1/Foto1208.jpg

cheers

Svenn - Still looking for chevy brackets. :salute: