Aust BGC production differences
 

While working on my front stub axle mounting plates I noticed a difference between some of the plates and thought I would share it with others.
I have come across 3 different plates- see the pics.
The red plate appears to be original and not a modified or butchered plate.
I have several of each (except for the red plate) L & R, so they are not one off items.

this thread may prompt others to share some production changes/differences- so post away!

I know there is some variation on stowage boxes and the mounting of the locking latches.

Hi Darrin . Here are my ones , I have one of each one with double webbing .. Dale



http://i74.photobucket.com/albums/i2...ps07b02b9a.jpg

Front Hubs
 

There is also a cast version for the Local Pattern carriers, similar to the Canadian and English carriers. Axle pin presses in like the cast ones.

jack bracket differences
 

Dale's thread/question as prompted me to add these pics with the jack bracket.
Notice the difference in locking nut or wing nut.

different rear cast suspension unit
 

check the different between the 2 suspension units.
The green unit is on my hull VR731, the rusty unit is from un unknown hull, possibly VR and very early.