![]() |
pintle hook spring brackets
hello, i am looking for a set of brackets which hold the leaf spring of the pintle hook. I need the 4 brackets which go inside the frame beams. Is there someone out there who can help me with these.
greetings Rob |
You'll have to be more specific. There's more than one type.
|
hello David,
oh wasn't aware of that. They choppen of the backend of the frame so i had to reproduce this piece including the the complete tow hook bit. The frame is of a late '44 or '45 F15a and i am looking voor the ones which are bolted inside the frame members, with the big 50mm hole in it and are casted. Hopefully this gives some more info. cheers Rob |
Hi Rob,
I know I have one side, I will have a look through the spares and see what I can find. James |
1 Attachment(s)
Hi, is this what you're after?
|
2 Attachment(s)
In these pictures you can see which brackets i meen.
There is also another thing i noticed. Are the brackets originel one which the rubber pads are mounted as you can see in picture 1? greetings Rob |
1 Attachment(s)
They don't use any rubber pads. Here's a picture of the kind that hangs below the frame.
|
Quote:
I could also cut off and give you the missing end pieces to your chassis as well. |
thanks David for the info and Tony i send you a pm regarding the bracket
|
1 Attachment(s)
Here are all of the components very similar to the set-up in Cletracs photo. I recall these came of a 60CWT. ... Brian
|
...and now......
....just insert into a large envelope and mail to Australia....or for the same money buy a fully restored Blitz locally.
When are we going to get those Star War digital teletransporters.....? Cheers |
All times are GMT +2. The time now is 16:01. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016