Track adjusting cam variations
 

I have 2 different track adjusting cams (both are unmarked). The size of the holes for the bar are different: one cam has 11/16" holes and the other has 7/8" holes. Obviously for different bars. Maybe a Canadian vs. T16 variation? There are 2 different cams listed for Canadian carriers: -B and -C versions: maybe they are different? Any comments on the diameter of the bar commonly used on Canadian Carrier cams?

Brian,

Attached you should find images of a C01UC 100737 B and C01UC 100737 C the wide one is the "B" version. All of the Canadian ones I have handled seem to be marked as part of the casting process and some of the markings can be very faint.

I believe that the hole sizes are the same for all Canadian ones but i am not near them right now to be able to measure.

Colin

Colin,
thanks for the great photos. Mine have no markings. Maybe they are for T16. Still curious what the diameter for the rod is supposed to be. If you have a chance t check the hole size on your cams that would confirm the correct size for Canadian cam.... Brian

http://mapleleafup.net/forums/showpo...55&postcount=1

http://mapleleafup.net/forums/showpo...21&postcount=2

Brian,

I will measure the holes but it will be a couple of days before I will be able to do it.

Colin

Brian,

The hole sizes in both C01UC 100737 B and C01UC 100737 C are 11/16".

"C01UC 100735, Bar - 24" steel" is 5/8" in diameter so it is fairly loose in the holes on the Track Adjusting Cams but it fits well in "XCTL 103450, Spanner - #802 Mk1 - Track adjuster clamping bolt nut" and "C01UC 100731 - Wrench - wheel spindle nut box"

Colin