MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Restoration Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=17)
-   -   Double Pulley Flathead V8 Water Pumps (http://www.mapleleafup.net/forums/showthread.php?t=25803)

Mark Towers 23-05-16 18:42

Double Pulley Flathead V8 Water Pumps
 
Hi all,

Could anyone kindly advise me where I could possibly purchase a double pulley truck water pump (flathead v8) for my Ford F60 CMP LAAT ?

One of my pumps has failed, I have tried to re build it with the correct kit but it has since failed again, and so now looking for a complete new pump.

Preferably new ... But a reconditioned one will also do 👍🏻

Any pointers will be greatly appreciated......

Kind regards,


Mark Towers

1944 F60 CMP LAAT
1942 L60 40mm Bofors Gun (Otis Elivator Co)

rob love 23-05-16 18:53

They are a bit far from home, but I know Rod Shaver in Arizona has the T-16 pumps which I believe will interchange.

The rebuild kits for the pumps are available from Mac's for around $30 and as long as you are using a press (hammer will not do) are not terrible to rebuild. However, the seal surface may need to be re-cut if it has pitting. That may fall onto a rebuild shop.

I am sure others will be luckier than we were on a pair of pumps about a year and a half back. We had one siezed, so brought both to NAPA to send in for rebuild. They returned a month later along with a bill for over $700. We will not make that mistake again.

The difference back in the day was that the double pulley was the heavy duty pump which had a actual shaft bearing while the single pulley pumps only had the bronze bushing. I have to wonder if, with the modern day replacement single pulley heavy duty (bearing shaft) pumps available from various suppliers, a double pulley can be made to fit them. Those pumps are reasonably priced.

Lauren Child 27-05-16 22:43

Peter Hommes of the Elalamein collection / Milmarket has them.

You can pick up NOS bearing/spindle assemblies from Dirk Leegwater at
LWDparts.

Hope that helps :)

Darrin Wright 28-05-16 00:29

try Summit Racing, new pumps just change the pulley over

http://www.summitracing.com/int/sear...ion=int&page=3

Flat Attack racing have new hi-flow pumps, twin pulley

http://www.flatattackracing.com/

Hanno Spoelstra 28-05-16 09:47

Not sure if they have double pulley pumps:

http://www.lilypadspeedshop.nl/c-495641/water-pumps/

Private_collector 29-05-16 10:19

I can vouch for the pumps from flatattack. I have a pair myself.


All times are GMT +2. The time now is 10:08.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016