Cabs 11 and 12 measurements needed!
 

Hi to all. I have a need for some 1:1 scale measurements of the 11 and 12 cabs
as in the photos I have posted below. I have done a good search of this site, and have found some basic measurements given, but do need some further clarifications.

I have several 1:35 scale CMP kits from 2 different model kit producers, and there appears to be some major differences in the size of their interpretations of the No.11 and No.12 cabs! Strangely, both of their No.13 cabs measure almost exactly the same size...

If someone with access to these cabs could get a chance to measure them up for me (either imperial or metric) I would be most grateful.

Cheers,
Pete M. :confused

"The Cause".....
 

Hi Peter: Next time I'm at the shop, I'll give you your measurements for the Cab 12. But it will take me a few weeks. I'm just very busy right now. If that works for you let me know. Cheers .....Robert :cheers:

Cab measurements.
 

Hi Robert. Will be much appreciated. No rush, as I've got plenty of other research do do in the meantime!

Also more Kiwi CMP images to process and post.

Cheers,
Pete M. :salute:

could you please post the measurements here for others to use as well please :) :thup2:

Hi Robert (or any other 11/12 cab owners on the forum). Have you had a chance to check out those 11/12 cab measurements as yet?

Cheers,
Pete M. :)

email address....
 

Hi Peter; PM me your email address and I'll send them down to you. I've had them here for a bit, but work has me swamped to the nines. You can post them on the forum if you like, I not sure how that works.
Cheers.....Robert :cheers:

Robert,

My hero, I just wish that there were others on this forum like you. :thup2:

jonathan

PM sent Robert. Thanks mate.

Pete M. :thup2:

Cab measurements from Robert
 

Robert has sent me the two following pics with measurements taken from his vehicle.

For the guys needing them in metric...done using my handy scale calculator program!

a) Windscreen width: 1250.95mm.
b) Windscreen height: 342.90mm.
c) Hood width (rear): 673.10mm.
d) Hood width (front upper): 381.00mm.
e) Hood width (front lower): 679.45mm.
f) Front plate intake diameter: 146.80mm
g) Grill height: 598.95mm.
h) Grilll width: 520.70mm.
i) Front cross brace: 395.35mm.
j) Lower front plate width: 695.95mm.

And rear:
a) Lower rear width: Approx 1473.20mm.
b) Height from bottom of cab to cab upper joint: 723.90mm CORRECTED...DUH! :doh:

I'll post some pics later comparing the Mirror and IBG 1:35th scale model cabs.

More to come. Thanks for your efforts Robert, I can now sort out which of those kits is closest to the real thing! :salute:

Cheers,
Pete M. :cheers:

723.9mm maybe? ;)

Correction...
 

Thanks for catching that Ilian..I mistakenly entered the imperial measurement!

Now corrected.

Cheers,
Pete M. :thup:

Cabs 11 and 12 measurements needed..yet more.
 

Hi to all. Dale Law has now sent me the front cab measurements from his F15A.
There appear to be some slight variations to Robert's Chev, but as I mentioned to Dale, 'Close enough for government work'! :thup2:

:cheers:
Pete M.

P.s. Anyone else with an 11 or 12 cab able to add to the list?