![]() |
Canadian Centurion tanks question
1 Attachment(s)
Did Canada ever use the Long Range hull like the Australians did with the bolt on 100 gallon tank?
Attachment 100457 Picture from previous MLU thread, not sure who it belongs to |
Hi
Hal Skaarup has a pic of the Cdn Mk 11 in Moncton. She has a 100gal tank. http://silverhawkauthor.com/images/s...Moncton-rt.jpg http://silverhawkauthor.com/armoured...swick_371.html regards Darrell |
Quote:
If you're really interested in Canadian Centurions, check out the threads on Modern Canadian Vehicles. Tons of information from very knowledgeable people. Cheers, Dan. PS: Can't comment on that paint scheme for the Centurion in Moncton. |
Thanks so much for the replies guys, super helpful and very much appreciated!
Regards John |
Centurion Mk 11
2 Attachment(s)
Here is a 1973 image of a Canadian Centurion Mk 11 in Germany. The CWM example was from LETE and therefore had been equipped to the latest Mk 11 modifications and this photograph shows it when it was still on outdoor display.
Attachment 100507 Attachment 100508 |
Very cool, thanks Ed. Did we upgrade the tanks in Canada to the L7 105mm or did they all remain 20lbrs until retirement?
|
2 Attachment(s)
Not wanting to steal Ed's thunder, but I thought that a picture is worth a thousand words. During the summer of 1978, a young 2nd Lieutenant of The RCR was going through Phase III infantry officer training at CFB Gagetown, part of which involved directing tank fire. Each candidate was given one 20-lbr round to give to the crew, after which the round would be fired at a target, selected by the candidate, about a mile and a half away. There was lots of 20-lbr TP-T or training purpose-tracer available to fire. So, in 1978, it was 20-lbr's for Gagetown.
The first photo shows our hero with his very own tank round. The second shows skid loads of 20-lbr TP-T. |
Wow, that is awesome Dan, what great memory that must have been, something I can only dream about, thanks so much for sharing that
Regards John |
Mike Cecil
John,
I forgot to cite the most knowledgeable person I know about Centurions, who is also a member of this forum. Mike Cecil and I carried on a very informative thread about the tank, five years ago this month. If you have any technical questions about the tank, send Mike a PM and he'd be glad to answer them. He was, and still is, very forthcoming to anyone on the forum with a question. Cheers, Dan. |
I served in Germany on Centurions from 1976 until we changed to rented Leopard and yes we love-ling filled those 100 gallon tanks everyday while on exercise. In fact I may still have the last time centurions were on parade. It was taken with a super 8 camera and really bad but I will look for it.
|
Hi Dan,
Thanks for your comments. Was it really that long ago? Still, to place things in perspective: not so much knowledge on the Canadian Centurion, but there is much that is common across all the Centurion users. Great images of yourself & live round. Rather than TP/T, I think these are 20 pdr (84 x 617R) HE/T rounds - indicated by the buff colour and thin red stripe. There were several marks of HE/T, along with a few different fuzes. Being late in the Centurion story (1978), the fuze is almost certainly the L17A4 - a point detonating (PD) fuze which evolved from a fuze originally developed for the Royal Navy, and adapted for use on 20-pdr when the Fuze 410 proved so problematic. I seem to remember that Canadian Cents in Europe were Mk11 with 105mm L7 guns, while those in Canada remained as training vehicles with 20-pdr. The reference was, I think, Don Dingwall's Service Publications book on Canadian Cents, but I can't seem to locate it just now. Mike |
Quote:
Quote:
Quote:
Quote:
Thanks again, Mike. I could talk Centurions all day. Cheers, Dan. |
Thanks for the replies as usual guys, I understand most of this has been discussed on the forum previously and is available with some research, but I do appreciate the quick answers. Hopefully since Mike isn't that far from me we can get together and talk "tanks" one day when he's in the area.
Regards John |
Ahh! Slow old me - :bang: - had not put two and two together until now, John: I'm right in deducing that you are the owner of the ex-Australian, ex-'Courage Under Fire', ex-Fox Studio Centurion-cum-Abrams in the faaaar west of Canada. How is progress with the restoration?
And I will make the pilgrimage and visit one of these days. Mike |
No Mike, that tank is owned by my friend Mark, he has re-done it again as an ersatz Abrams for use in film work. I am working on a different project at the moment, currently on the down low. But would be great if you are in the neighborhood to stop in at the shop for a visit.
Regards John |
cent is a great tank to drive. i'm sure you'll enjoy it but the fuel bill might make your eyes water :)
|
Apologies for my erroneous assumption, John, but now I have two reasons/people to visit in your neck of the woods.
Mike |
Hi, I'm a volunteer "fixer" at the Ontario Regiment Museum in Oshawa, Ontario. We have a project to get one of our Canadian Cent's up and running this year. Not pristine, but running. We just bought a nice Mk 4b engine for it.
I'm a newbie at this so I have been trying to figure out what Mk of Cent we have. It has the armoured fuel tank on the back, a 20 lbr gun, but it it doesn't appear to have the voltage regulator box in the hull for the engine-mounted generator. I have searched on what the various Mks are but it's confusing. Can anybody help me with what we have here? Malcolm |
Hi Malcolm,
A couple of questions to assist with the ID: Does it have the additional armour plate welded to the upper glacis plate? Is the co-ax mounting for a .30 cal Browning MG? Is there a hatch or a welded plate on the rear of the turret? Regards Mike |
3 Attachment(s)
Mike,
I can see no evidence of a layer of armour welded over the original upper glacis plate. I have attached photos of the co-ax mount and the rear of the turret. Hopefully, those will answer your other two questions. Malcolm Attachment 101138 Attachment 101139 Attachment 101140 |
Centurion
Two questions:
1. Have you asked the Ontario Regiment Museum which Mark of Centurion it is and if so what have they said? 2. Is there any evidence inside of a brass plate with the vehicle's serial number, this will be two numbers-two letters-numbers and what is it? |
Hi Malcolm,
I'm a bit puzzled by your images, as the interior shot appears to show a .50 RG and .30 Co-ax combination MG mount, which would indicate the main armament would be a 105mm, rather than a 20-pdr. Do you have any images of the front of the turret and main armament, please? The turret is also fitted with a rear basket to hold the searchlight normally fitted along with the Infra-Red equipment. A Centurion: (1) with 20-pdr, without up-armouring, and fitted with a long range rear fuel tank, and a co-ax of a .30 cal, would be Mk.5 LR. (2) with 105mm, and as above, would be a Mk.5/2 LR (3) with 105mm, , fitted with 50 RG, , IR sights and searchlight and as above, would be a Mk11 LR I'm not aware that Canada ever fitted the .50 RG to tanks equipped with the 20-pdr main armament - as far as I know, Australia was the only Centurion operator with that particular combination. Regards Mike |
Quote:
I'll have look for the plate. Malcolm |
Could it be an ex British one ?
David |
Quote:
It must have come from somewhere. The museum must have records. However, pending the discovery of a paper trail, the more photos of the tank you post, from all angles, the easier it will be for Mike and the others to identify it. I would think a photo of the top and bottom of the glacis plate would allow Mike to determine if it had been up-armoured. It's also got a very strange paint job, like it was a monument piece at one point. Good luck on the project. It would be nice to see one up and running. Cheers, Dan. |
5 Attachment(s)
An old hand told me today the Cent came from St. Hubert Base in Quebec. We got it when the base was closed down. I see from Wikipedia St. Hubert was primarily an air force base, so this surprises me a bit. It was closed down in the mid 90's. I've only been at the museum for a few years but I'll go out on a limb and say that not much if any paperwork exists or changes hands when an old beater gate-guard is given to a museum willing to take it. But I will ask about paperwork, just in case.:)
A guy who worked on the tank a few years ago showed up today so I picked his brains. He showed me the two large tapped holed in the top of the mantlet where a mount for the spotlight was attached. He confirmed what Mike said about the part of the bustle designed for storing the light. He also told me he believed the CFR number painted on the tank, 52-S-100S (see photo) is a typo and should be 52-8-1008 (or was it 52-81008?). He confirmed the upper glacis plate doesn't have the additional welded armour. There are no brass plates inside the tank. He showed me 4 tapped holes in the left hand wall of the driver's compartment where a plate used to be. He confirmed there were 2 coax machine guns installed but he was surprised to hear this indicated a later Mk as he thought it was a Mk 5/2. His theory on the 20 pdr is that it was installed when the 105 was removed for use elsewhere. He showed me where a 50 cal was mounted on the commanders cupola. There is a small control panel in the turret that refers to IR lighting. He also suggested that the impecunious Canadian army was selective on what upgrades were installed, based on need and cost, so some cherry picking was done. Maybe that explains an unusual mix of upgrades? I have attached some photos of the front of the turret as Mike requested. Thank you for your help on this. It's a fascinating exercise. I'd be happy to take more photos if it would help. Malcolm Attachment 101180 Attachment 101182 Attachment 101183 Attachment 101184 Attachment 101185 |
That looks like a 105mm gun profile to me, but I'd have to see more of it to confirm, especially the fume extractor. Mind you, it is possible to jamb either a 20 pdr barrel or a 105mm barrel into the same breech and mounting.
I'm betting it's a "Tank, Medium Gun, Centurion Mk 11 LR". The tank would be fitted with two co-ax weapons, but one is the Ranging Gun, the L6A1, .50-cal, which is restricted to firing 3-round bursts at each depression of the firing pedal (actually, to be precise, three single rounds, controlled by a controller box). So the .50 is not strictly used as a co-ax machine gun, hence the name 'ranging gun'. It was originally termed a Ranging Machine Gun, but the terminology was altered to reflect its true application as a ranging gun only. However, the controller could be overridden by the loader/operator by hand, in which case the weapon reverted to true automatic operation. Mike |
Sorry, Mike, I didn't realize you wanted to confirm that the gun was a 20 pdr. I can tell you it has no fume extractor at all. Does that confirm it is a 20 pdr? If not, I'll take more photos.
Malcolm |
Probably, Malcolm - the early-issue 'A' Barrel of the 20-pdr had not fume extractor, whereas both the 'B' barrel and the 105 mm did have a fume extractor fitted (but with different 'looks': the 20pdr had round ededges and concentric to the barrel, the 105 had squared edges and was eccentric).
I suspect, though, that what we are seeing is a Mk11 LR with a 20-pdr barrel fitted. Maybe the museum could locate an L7 105-mm barrel and do a swap? I'll likely be in your area in November, (considering heading to a history conference at RMC Kingston): maybe I can drop by for a peek? Mike |
Quote:
|
All times are GMT +2. The time now is 10:48. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016