MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Restoration Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=17)
-   -   Bedford QL 6pdr portee (http://www.mapleleafup.net/forums/showthread.php?t=29187)

Jonathan Moore 29-07-18 11:23

Bedford QL 6pdr portee
 
3 Attachment(s)
A couple of years ago I bought this rather sad looking Bedford QL and believe me, sad would be an understatement. At first I couldn't establish what version of QL it had started life as but after a session with the cutting torch and 9" grinder, I at last found the chassis number. It was manufactured in 1944 as a QLD and has since been used, abused and comprehensively destroyed. What to do with it was the question, really it was only any good for spares but the fact that it was road registered gave it some brownie points. After a long hard think, actually not long or hard, I have decided to recreate a 1941 QL 6pdr portee. I am not likely to start in the next 18 months, so I am looking for information, plans pictures, dimensions or even the whereabouts of "Mary". I have already bought a lot of the required replacement automotive components and if in doubt, an Airfix 1:35 scale model but actually dimensions would be very welcome for either the QL or the 6pdr. I did try contacting the Royal Artillery museum in Woolwich, London before it closed but they had already closed their library.

Any information would be good, I always live in hope.

Jonathan

Rob Abbott 30-07-18 11:03

Bedford QL 6 Pounder portee
 
Hi Johnathan
I have a complete 6 Pounder which you are welcome to come and have a look at/take measurements/photos/etc.
I'm just outside Swindon down the M4 so not too far away from you hopefully.
If it would help just let me know.
Good luck with the conversion
Rob

Niels V 30-07-18 12:19

The Shopland collection also has Portee in their collection, albeit on an Austin K5

Jonathan Moore 31-07-18 11:11

Rob,

That would be a fantastic opportunity thanks. I am making plans to come down that way in the near future so I will let you know when and I hope that can meet.

I am aware of the Shopland's collection portee and I am going to see if I can gain access to get some detailed pictures but thanks for the reminder.

Jon

Hanno Spoelstra 01-10-18 13:19

Have you seen the thread Bedford QL ex-portees?

HTH,
Hanno

Jonathan Moore 01-10-18 16:30

1 Attachment(s)
No Hanno, I hadn't seen that thread, I see that Mary is pictured in it, I don't know if it actually this Mary but this one appears to have unfortunately disappeared. I would really have liked to find her and get some measurements of the cab alterations.

Thanks for bringing the thread to my attention.

Regards,

Jon


All times are GMT +2. The time now is 18:21.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016