MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Softskin Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=5)
-   -   Ford V8 clutch plate (http://www.mapleleafup.net/forums/showthread.php?t=34077)

Alastair Thomas 29-03-23 22:25

Ford V8 clutch plate
 
My 95HP Ford flat head V8 engine has an 11 inch clutch.
The driven plate needs re-lining.
Can anybody tell me the thickness of the friction lining on each side.
My re-lining chap says he has often come across re-lined clutch plates for these engines, which have too thick a lining.

Kind regards,
Alastair
F60S LAAT
Ford Lynx I MkIII*

Dave Newcomb 29-03-23 23:15

Flathead Ford questions
 
Fordbarn.com an International site of Flathead folks use the Early V8 group and go to Forums. The best of the Best are there. Dave

m606paz 30-03-23 01:36

http://www.mapleleafup.net/forums/sh...d.php?p=193483

Hanno Spoelstra 30-03-23 20:51

3 Attachment(s)
My NOS 11” clutch plate (with some storage rust, errr, patina) has a total thickness of 10 mm. The lining is 3,5 mm thick.


Attachment 133278

Attachment 133279

Attachment 133280

Alastair Thomas 30-03-23 21:13

Thanks everyone.
Alastair


All times are GMT +2. The time now is 20:33.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016