MLU FORUM - C15TA - WS19 Install instructions

MLU FORUM (http://www.mapleleafup.net/forums/index.php)

- The Armour Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=7)

- - C15TA - WS19 Install instructions (http://www.mapleleafup.net/forums/showthread.php?t=35054)

Tim Bell

25-04-25 17:31

C15TA - WS19 Install instructions

4 Attachment(s)

Apologies if this has been posted already.

From online Canadian Archive - Reel C-5819, Page 2912 onwards

Attachment 140398

Attachment 140399

Attachment 140400

Attachment 140401

Tim Bell

25-04-25 17:32

3 Attachment(s)

Attachment 140402

Attachment 140403

Attachment 140404

Barry Churcher

11-05-25 21:26

Tim, thanks very much for this information on the No 7 table. I had planned to use this 19 set installation in my truck but lacking info on the table I was going to use the design that is in Jim Gosling’s C15TA and Jordan Baker’s Otter. They both use slotted 1 ¼ X 1 ¼ angle iron for a top. Jordan kindly provided me with dimensions and I have bought the steel but I will have to re think this now. This flat top table will be a lot easier to fabricate also.
Cheers
Barry

Tim Bell

12-05-25 14:22

Barry

Glad it is of use... though sorry to have caused you extra work! (or maybe not if easier to fabricate).

Tim

All times are GMT +2. The time now is 12:39.