M38A1 CDN3 Mirrors
 

Looking to the experts regarding mirrors for my CDN3.
The 53 and 67 models used round mirrors according to the OEM manual, while the 1970 model appears to have rectangular ones.
Understandably, I’m sure maintenance used whatever was on hand to suit the purpose. Does anyone have definative proof that the rectangular ones were in fact issued with the CDN3? I’m in the market for such if someone has a pair laying around or know where I can get them.

Also, I have seen and heard that perhaps there was actually. rear view mirror for the windshield. Were these a thing / an afterthought or a non official modification? Never saw one on the many Canadian jeeps I’ve looked at over the years.

When I started as a mechanic in the cf, all the small round mirrors had been replaced with the rectangular mirrors. I only recall them coming in black finish for the metal. I think some were dominion auto, and I remember chryco mirrors as well. I remember that one particular brand only held the glass in with the rubber trim of the mirror. We would glue them in with contact cement, otherwise they didn't last one trip.
I think your query about the mirrors on the cdn 3 can be answered in 3 places. If someone has the cdn3 supplement for the parts manual, it would list a different part number. Ir if someone has the data summary for the cdn3, it would show what was in use in 1970. But my guess is it will be the same small mirrors as on the other fleets. Even the m151a2 came with the small mirrors in 1974.
Ill have a look in my library and see if I can find a definitive answer.

Rob, thanks. I must admit that I do have the parts book with the CDN3 supplement but I do find it to be a challenging read to decipher and comprehend it.
The Sup does have a vehicle profile picture that shows rectangular mirrors. I know sometimes that manufacturer literature doesn’t always carry over to production units sometimes, hence my question.
If anyone has pics of CDN3 in service with these mirrors I’d be curious to see them. Anything you might find is appreciated

M38a1cdn3
 

Perhaps this image from "7610-21-848-1570 Change 1 Repair Manual Truck, Utility, ¼ Ton, 4x4 M38A1 CDN3 - 1970" will help.

Attachment 141790

Well I guess one is never too old to learn something new. I think have the same photo as Ed, however mine is from 79610-21-848-1569 (operators manual supplement CDN3). It also shows the recangular mirrors on both sides of the Cdn3.

Unfortunately I don't have the CDN3 supplement for the parts manual. I had it in the past...no idea where than manual went.

WRT the CDN3 supplement pages for the parts manual Chris, those pages were located on the last 4 or 5 pages of the text in the parts manual. Have a look in there and see what it lists for the mirrors. It will most likely reflect a Jeep (65909) part number.

Those parts in that supplementwill be strictly for the CDN3, although in a some cases, we would retrofit some of those parts onto the CDN2 jeeps if it was an upgrade. The solid state turn signal flasher and harness was one we would commonly retrofit, although I think there was a mod instruction for that.

I suspect the only place you may find the original mirrors still on a CDN3 would be on one of the parade and ceremonial jeeps, as they were low mileage and not subject to the regular beating that any field jeep was subject to. The truck in Shilo had around 2300 original mileson it if I recall correctly.