Rob Groves' Ford CMP for sale central Ont.
 

Hi all,
I know there is a good home somewhere around ontario for the F15a, It's still for sale.
It comes with everything you see in the pictures plus engine Transmission, all the little odds and sods and a GS box that in my opinion is rebuildable. also I have extra hatch and door as well as an extra two speed Transfer case with PTO.
Everything has been rebuilt exept for the motor which is dis assembled and will require the standard bearings and gasket set.
Wheel wells need to be welded back in.
$3000.00 (Canadian that is)
Its located south of Barrie Ontario
email me at grovesrobert@hotmail.com

Also A lot sale of individual links and pins is for sale..about 100 links and 160 pins.. email me if interested.

Rob

1

2

3

4

5

6

Dont Delay in getting ahold of me, you'll want to see this for yourself.


Rob

Here's my Ford CMP
 

Hey my CMP is for sale, check the "For Sale" area for info.

Rob

Rob Groves' Ford CMP for sale central Ont.
 

Ok, my 1943 Ford CMP Is for sale... I'd like to get $3000.00 O.B.O. for it along with all the goodies.

It has been a frame up restoration for 9 years now, Stewart Loy is the only one I know that has actually seen it so if you want an opinion please contact him.

Some Details: Brakes: All drums turned w/new grease seals, pads reshoed, wheel cylinders torn down and come with a rebuild kit from Mac's antique auto, Rebuilt Master Cylinder.

Body: every piece has been torn down and sandblasted primed painted, every bolt is new, High tensile strenth bolts in the tow hook cross member area.

Seats: Reapolstered.

wheels: torn down blasted painted, new innertubes, decent tires.

Engine: Original flathead V8 removed from truck and torn down cleaned painted and speced out as low mileage rebuilt in 1971 by Precision Automotive in Toronto. needs to be put back together.

Misc: good Dash won off ebay. Rebuilt Door hinges. extra intakes, distributor parts etc.

GS box is available but its as is where is, needs sandblast and rebuilt and is located in Sundridge area.

New fabricated Gas Tanks (Right and left)

Left and right Windows with new plastic and canvas.

I also have a Chevy CMP for sale for 700.00 It is located in the Sundridge area.

If interested email me to setup a time to call me.

Image located in "softskin thread" with the heading "Here's my Ford CMP"
Rob

http://www.mapleleafup.org/forums/at...=&postid=70207

Hi Rob,

I modified your postings somewhat to maximise exposure. Sorry to hear you have to sell it, I hope it goes to a good home. Sounds like a very good buy.

Cheers,
Hanno

thanks
 

Thank You Hanno, I appreciate you fixing the post. I had a problem linking to the existing Picture.

To all that consider my CMP... I have literally put Countless hours into this truck, I'm sure the appropriate owner would have her running within a year.

Oh yea, I forgot a few things... Every grease nipple is new. The Springs where individually sandblasted and put back together with new brass bushings pressed in. Steering box, Transfer case, Tranny all rebuilt with new (modern) seals and the odd bearing were needed. I'm sure I'll still think of other things.

Rob

Re: thanks
 

Rob,

My pleasure. I've merged your thread with an earlier one showing more pictures. If I was a Canadian looking for a CMP to restore, I'd surely be on you doorstep ASAP. . .

Good luck!

H.

Seen It - Liked It.
 

I was in the Barrie area last summer and thought that Rob had done a fine job on this Ford CMP.

It is a well started project with most of the dirty stuff done well, and I think that it is reasonably priced for all of the new bits and work that is already into it.

Good luck.


Stewart

Re: Seen It - Liked It.
 

Bet it looked better looking at it through a beer bottle..
Looks good now ,so my imagination is getting to me..gotta get out from under this cold weather..
:remember :support :drunk:

Any pictures.....
 

Hi Rob

Any pictures available of the "other" Chev truck you are selling????

Bob C.