MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Carrier Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=6)
-   -   Windsor carrier (http://www.mapleleafup.net/forums/showthread.php?t=8398)

mudeng 01-04-07 16:32

Windsor carrier
 
1 Attachment(s)
Can anyone help with identifying the purpose of these two controls alongside the drivers seat.
Could the small cranked lever be the starter pull lever, as I believe these carriers had a cable attached to to a lever on the starter motor switch.
The second, longer one, with a black know, was this something to do with the differential brakes???

Again, by way of interest, ther is a mech screen fitted to the lower half of the air inlet opening, is this original???

Thanks.

George

Richard Farrant 01-04-07 18:08

George,

The longer lever with knob is for the two speed rear axle, high and low ratios. The other lver is as you say, for the starter.

If you mean the mesh screen shown by the levers, this is over the oil coolers for rear axle and engine.

mudeng 02-04-07 00:12

Windsor
 
Thanks Richard,
Yes, the screen over the oil coolers seems original.

Thanks for the help and quick response.

George.


All times are GMT +2. The time now is 22:28.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016