MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Carrier Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=6)
-   -   Bracket studs (http://www.mapleleafup.net/forums/showthread.php?t=9923)

ron 16-11-07 11:36

Bracket studs
 
Hi Guys,
Is there anyone who can tell me where I can buy the 1/2" u n f studs that join the bracket together that surounds the rear axcel on a carrier,the bracket part number according to the workshop manual is 708 for either left or right side, its called bracket & cap assy are they available as new parts from anyone here in Australia? I require 8 of them.
Thank you,
Ron,

colin jones 17-11-07 06:27

Hi Ron, for the amount of time it might take to find them you might be just as well off getting a 1/2" unf die and make your own. I've done it quite a bit on 3168 and it certainly does save time. ( various sizes of course )
If you do, just use cutting paste and take your time. She'll be right.
Colin.

ron 17-11-07 06:41

Bracket bolts
 
Hi Colin/
Thanks mate I have just got home with a fist full of 1/2" Hi tensile bolts and plan to cut the heads off and extend the thread along the rest of the bolt.
I was hoping to take the easy way out and just buy some, I must be getting lazy after all its only a bit of time really.
Thanks for the suggestion keep us informed on your various projects,
Regards,
Ron,

Ian Pullen 17-11-07 13:28

Carrier
 
Ron, have sent a reply to your PM. Check your in box.
Good luck with it all.

CHEERS IAN


All times are GMT +2. The time now is 08:04.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016