Rifle Butt Holders
Below are pictures of the holder I have. I've yet to use a router to do a second but that's one of those lesser needed objects!
In any case, the holders are of wood, what type I don't know. The measurements are:
Heighth: 1 3/4"
Width: 2 7/8"
Length: 5 7/8"
Inside depths: 1" to 1 7/16" The inside "floor" does slope.
Wall thickness: 5/8"
Mounting holes are 2 7/8" on center, at least for my F8. They are 1 1/2" on center from each end.
Hope this helps!
Regards,
Jim
|