Darryl, that's the one all right. I didn't like their plastic stock so I made one out of walnut and used an old Lee Enfield butt plate.I also flipped the bottom part of the magazine over and glued some fired .303 brass in the grooves for a more realistic look. I'm going to put the barrel pipe in the lathe to put the grooves in it too. I made the stock extend up through the action part to give more strength and used a piece of 3/8' black iron pipe for the barrel. This made it pretty sturdy.
It looks good when you're back a ways but the plastic hasn't got any fine details in it. Everything is kinda rounded off. For the price it does the job. I know if I drove around with it mounted in a truck the guys in the striped pants would have me stopped in record time.
The attached pic shows the stock and barrel I made
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set
1940 Cab 11 C8 cab and chassis
1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun
1940 Cab 11 F15A w/ Chev rear ends
1941 Cab 12 F15A
1942-44 Cab 13 F15A x 5
1942 cab 13 F15A with 2B1 box
1943 cab 13 F15A with 2H1 box
1943 Cab 13 C8A HUP
1944 Cab 13 C15A with 2C1 box
1943 Cletrac M2 High Speed Tractor
MkII Bren gun carrier chassis x 2
|