Quote:
Originally Posted by Hendrik van Oorspronk
Hello Peter, you are right, the number should be 6408  , your bearing are the same as I found in my wheels, they are a bit ofset, to let my sealings run free I needed some shimms, take good care to the bushings between the bearings, they were the major problem to me, you need them when you change from plain bearings to roller bearings and I had more plain than rollers.
Hendrik van Oorspronk  |
Thanks for confirming that number, Hendrik, might be worth going back to the original thread and updating that part number for the other guys. The original bearings are one-way thrust types, presumably with a pre-load when assembled. The 6408 is a standard deep-groove bearing, which for what most Carrier owners use them for, will be fine. My originals have 'THRUST' marked on one side and the bearing centre can be taken out quite easily from one side.
The 6310 bearing has a 50mm centre ID, but is 1/8 the price of the 6408, so we will probably get a set of those for the price of one 6408 and make new stub axles (which we have to do anyway) for the trolley. See ebay #320249498440
Are you saying that the basic wheel is the same, and that you can swap plain and ball bearings between them?
Peter