Another two carriers
I was looking at my MK2 armour and noticed that where they had riveted the back plate on at the bottom all the rivets were hammered flat all across on the out side .The only reason I think this was done was that the long box or motor crank that goes at the back wouldn't interfer with the rivet heads .On the sides there is some special bolts with heads the can be held with a flat screw driver .Some are used to bolt the two steps on Not sure what the rest are for . Your riveting sure looks good and I think away better than any othe method George
__________________
George is hooked on OD
5 window DT969
8 ton Fruehauf trailer
M2A1Halftrack ,CMP #11 F15A1 #13 F15A1
RAF Fordson Tractor, 42 WLC HD
No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts
MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407
Hull plate # 7250 all have walk plate on back steps
1917 Patent modle amphibious army tank
|