2 piece truck sump pan
G'day Gents,
I think that Ron is talking about the two piece truck pan. the type that you can unbolt the forward flywheel section of the sump, without opening the "wet" section of the sump.
This style of sump has a further flange and bolts lower than the usual type of sump in a carrier, and as a result will not sit in the correct position. A member of this forum slotted the floor of his carrier so that he could fit this style of pan. It does however, have an entirely usual sump drain plug. Not one that allows access to the pump pickup point for ease of service.
The sump pan with the ability to service the oil pump pickup with the bolt on plate must be a third type.
Pedr
|