Start me (h)up!
Quote:
Originally Posted by Bob Carriere
On the screeching/sparking starter drive... (We swapped out the starter but ran into other issues - the "new" starter got really hot, so re reinstalled the old starter and ran a return spring on the starter lever - it addressed most of the issues)...
I would like to compare the linkage to the other HUP hulks you have to see what differences we can observe...From by brief look at the prototype it seems your starter lever to be too far back when disengaged......(Done - the mounting flange on the 45 HUP was bent upwards from abuse. The handle had also been broken and rewelded at a different angle - we bent it back into the proper aspect angle -it pays to have spares).
Boob
|
The rules to this message board are too logical...msg too short, indeed!
__________________
RHC
Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$?
|