Hup bumper mounting brackets
I got a request for photos of the HUP (44 or older) bumper mounting brackets. Believe it or not, I only had one HUP nearby with said brackets. They appear to be 8 inch by 4 inch plate metal (same thickness as the frame) that has been bent 90 degrees forming an even "L" shape. As seen in the photo, the end of the frame side bracket has been cut on an angle leaving approx one inch bottom of the bracket. Three holes are drilled on the frame mounting end which held rivets, and four holes drilled in the bumper end to match the "D" rings. I am not sure if the weld was a post war mod or not.
__________________
RHC
Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$?
|