[Bob Carriere]

Was trying to take some measurments and pictures for Gordon.......

Info will be posted on MLU eventually.....

Part of my problem is how the tool box was fastened to the frame.....of course itr was 5 years ago when I removed it and I can harldy remember last week. ...but I do have pictures.... and some hand drawn sketches.

Originally the tool box was intalled..... over the T case frame crossmember...but in my situation the previous owner has\d change the Tcase for a 2 speed with sticks out higher in the suqare opening of the corss member...... which implies that some wood spacers "may" have been used. I remember that my tool box was held by J bolts that went through the bottom of the box

The bottom of the box is also drilled for two different frame width.... the inside holes are even with the C15a frame rails... the second set of holes are about 6 inches wider......and are not drilled completely through the bottom of the box......

Pictures will help sort out the holy issue.

Meanwhile..... if anyone has a reasonably original box set up I would be interested in how it is mounted to the frame.

BooB