thanks for the info alex. the guy's at the machineshop took care of that so thats easy for me. keith I send you a list as soon as possible.
about the engine now, I putt in the pistons very carefulley and connected them to the crankshaft then it was time to putt the oilpan in place, for this I made the gasgets my self, out off cork. then it was painting time grey this time. after it was dry I placed the head on the block and torgued the bolts and placed the valve rod's back in place.
I ajusted the valve rocker play, a little bit more open than by the book (cold engine) and ajust this later (warm engine). so thats that for now back inside and have a
cheers jaap