[David DeWeese]

Hi,
My other tank on hand,(a Ford one), was badly rusted through, with 1/2 of the tank so bad that it could barely hold it's shape.
Since my other tank was still serviceable, I decided to make a dummy tank of the second one.
Opened the tank up on one end, cut out the rusted baffles, then wrapped the entire tank with duct tape. Dug out several pounds of debris, as this tank had been a mouse hotel/bathroom for decades.
Ground out all the rust with an angle grinder and coated the inside with several layers of fibreglass matting, removed the duct tape, then worked the outside with body filler to slick it up.
As I am going to try and reproduce a British Duple body for the C8, I installed a mock filler neck in the end of the tank for use with that type body. Will make another tank end plate and filler neck for the good tank, but will use adhesive to attach it as I don't want to modify a good original tank...
Thanks, David