I was just at my friends place and he has all his trackpads drilled over size .Made up oversize pins from cold rolled steel and harden them about 25ooo and is now assembling them If you harden them all the way they will brake NOTE if you take the pins out be sure to save the cast washers that will be put on the new pins .If you turn the sprocket backwards they will be like new unless they are badly worn .Friend Jim is going to rebuild a few sprockets .He does great work .There are two types of sprockets .One has a flange on each side ,the newer ones are flat on the sides from the top to bottom It will be almost impossible to get some one to do this unless you have a big checkbook
__________________
George is hooked on OD
5 window DT969
8 ton Fruehauf trailer
M2A1Halftrack ,CMP #11 F15A1 #13 F15A1
RAF Fordson Tractor, 42 WLC HD
No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts
MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407
Hull plate # 7250 all have walk plate on back steps
1917 Patent modle amphibious army tank
|