I used the 50 x 27 x 110mm bearings as the 40mm ID bearings were so expensive, i have machined spacers to go onto the axles so will post up on my thread in due course, if the bearings are the same as on yours (as mine) i can provide you with the dimensions if required.
Cheers
Richie
__________________
is mos redintegro
__5th Div___46th Div__
1942 Ford Universal Carrier No.3 MkI*
Lower Hull No. 10131
War Department CT54508 (SOLD)
1944 Ford Universal Carrier MkII* (under restoration).
1944 Morris C8 radio body (under restoration).
|